Lexmark C530DN Technical Reference - Page 77
Table 2-24, User-Defined Pattern, Table 2-25, Rectangular Area Fill Graphics
UPC - 734646030908
View all Lexmark C530DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2-65 PCL Table 2-24: User-Defined Pattern Command / Parameters ESC*c#W[data] # = number of data bytes ESC*p#R 0 Rotate with print (Default) 1 Fixed ESC*c#Q 0 Delete all patterns (temporary and permanent) 1 Delete all temporary patterns 2 Delete pattern (last ID specified) 4 Make pattern of last ID # temporary 5 Make pattern of last ID # permanent Function / Result User-Defined Pattern Downloads binary pattern data. Set Pattern Reference Point Sets the pattern reference point to the current cursor position for userdefined patterns. Note: Default pattern reference point is the upper left corner of the logical page. Pattern Control Manages the use of user-defined patterns. Note: Use the Area Fill ID command (ESC*c#G) to set the ID. Table 2-25: Rectangular Area Fill Graphics Command / Parameters ESC*c#H # = Number of Decipoints (0 - 32767) (1 Decipoint = 1/720 inch) Default = 0, valid to 4 decimal places ESC*c#A # = Number of PCL Units (0 - 32767) Default = 0 ESC*c#V # = Number of Decipoints (0 - 32767) (1 Decipoint = 1/720 inch) Default = 0, valid to 4 decimal places ESC*c#B # = Number of PCL Units (0 - 32767) Default = 0 Function / Result Horizontal Rectangle Size (in Decipoints) Specifies the rectangle width in decipoints. Horizontal Rectangle Size (in PCL Units) Specifies the rectangle width in PCL units. Note: The size of PCL Units is set by the Unit-of-Measure command. Vertical Rectangle Size (in Decipoints) Specifies the rectangle height in decipoints. Vertical Rectangle Size (in PCL Units) Specifies the rectangle height in PCL units. Note: The size of PCL Units is set by the Unit-of-Measure command.