Lexmark C530DN Technical Reference - Page 116

3-19 PJL Table 3-3: Common Variables for Both Printer Languages (Continued) Variable USERNAME (SET only) WIDEA4 Function Print and Hold Username A4 width Selections "username" username is a text string truncated to 24 characters. Note: A null (" ") string is an acceptable value and indicates no Print and Hold Username is specified. NO, YES NO indicates the A4 width is 198 mm. YES indicates the A4 width is 203 mm. Factory Default NULL (No username) NO Printer Unique Variables for Both Printer Languages The following variables are unique to some Lexmark printers and are supported for both PCL emulation and PostScript emulation. Therefore, the [command modifier:value] parameter should not be specified. To determine which variables your printer supports, see "Table B-2: Printer Unique PJL Variables for Both Printer Languages" on page B-4. Table 3-4: Printer Unique Variables for Both Printer Languages Variable LACTIVEBINRESET (DEFAULT only) LADVANCEDSTATUS (DEFAULT only) (Port specific) LALARMCONTROL (DEFAULT only) LAUTOCRLF LAUTOLFCR LBLANKPAGES LBONDLENGTH (DEFAULT only) LBONDLOADING (DEFAULT only) Function Active Bin Reset Advanced Status Alarm Control Selections MANUAL, AUTOMATIC ON, OFF ON enables parallel bidirectional support. OFF disables parallel bidirectional support. OFF, SINGLE, CONTINUOUS Auto CR after LF Auto LF after CR Blank Pages Bond Length ON, OFF ON, OFF DONOTPRINT, PRINT Note: Some printers have a fixed value of DONOTPRINT. NORMAL, SHORT Bond Paper Loading OFF, DUPLEX Factory Default MANUAL ON SINGLE OFF OFF DONOTPRINT NORMAL OFF