Lexmark C530DN Technical Reference - Page 285
LogicalSize, ioerror, rangecheck, Searchable, Device Parameters for the IODevice %flash1
UPC - 734646030908
View all Lexmark C530DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
4-90 PostScript Table 4-11: PostScript Emulation Device Parameters (Continued) Key Type Definition InitializeAction integer Specifies an action for initializing the disk. Supported values are: 0 Indicates no action; the value returned when the parameter is read. 1 Indicates that the current file system (if any) should be deleted and a new one of LogicalSize created (the disk is assumed to have been formatted already). The disk must first be mounted; otherwise, an ioerror results. 2 Reformats the entire disk before creating a new file system of size LogicalSize. 3 (or greater) has the same effect as the value 2 and also tests the disk x - 2 times. Note: The current file system refers to /FileSystem. See Type as follows for more information. LogicalSize integer Specifies the size of the file system to be created and is as an argument by InitializeAction. • If 0 (zero), InitializeAction uses the size of the entire disk. When queried, indicates the current size of the file system on the device (in pages). A value of 0 indicates that the device is not mounted. • If set with a certain value and the device is reformatted, a query returns the value that was set. If queried before the disk is reformatted, a different value from the one set may be returned because it may return the current size. • If set to 1, 2, or 3, an ioerror occurs. Legal value: Any non-negative integer, including 0. The value must be less than or equal to the value of PhysicalSize. If set to a value greater than PhysicalSize, or less than zero, a rangecheck error occurs. Mounted boolean True False System attempts to mount the disk. System attempts to dismount the disk. A device must contain a valid file system to mount successfully. When a device is mounted, it is known to the system and is readable. To verify if the device is currently mounted, query this parameter immediately after setting it. PhysicalSize integer (Read-only) Indicates the size of the disk (in pages). Valid only when the disk is mounted. A value of 0 (zero) indicates that the device is not mounted. Removable boolean (Read-only) Indicates if the drive supports removable disks. Always returns False. Searchable boolean (Read-only) Indicates if the disk participates in searches in the file system operations that specify a filename without specifying a device. SearchOrder integer (Read-only) If the Searchable parameter is True, indicates the priority assigned to the disk when searching for a file and no device has been specified. A lower integer indicates a higher priority. If the Searchable parameter is False, this value is ignored. Type name (Read-only) Always returns the value of /FileSystem. Writeable boolean (Read-only) Indicates if the files on the disk can be opened for write access. If the disk is write protected, this parameter is a constant equal to False. When the disk is not mounted, this parameter indicates if the drive supports writeable media. Device Parameters for the IODevice %flash1% BlockSize integer (Read-only) Free integer (Read-only) Indicates the amount of free space available (in pages) on the flash. Valid if the flash is mounted (mounted is set to True). A value of 0 (zero) indicates that either the flash is not mounted or is full.