Lexmark C530DN Technical Reference - Page 149

3-52 PJL Printer Unique Variables for PostScript Emulation The following variables are unique in some printers and are supported in PostScript emulation only. The [command modifier:value] parameter should be specified as LPARM:POSTSCRIPT. For example: @PJL SET LPARM:POSTSCRIPT LPICTUREGRADE=ON[] To determine which variables your printer supports, see Table B-6 on page B-14. Table 3-8: Printer Unique Variables for PostScript Emulation Variable LPICTUREGRADE™ LPSFONTPRIORITY Function PictureGradeTM Font Priority Selections ON, OFF RESIDENT, FLASHDISK Factory Default ON RESIDENT Printer Unique LRESOURCE Variables Use the following variables when additional storage devices are installed. The [command modifier:value] parameter of the DEFAULT, INQUIRE, DINQUIRE, and SET commands must be specified as LRESOURCE:"device:filename.filetype". For example: @PJL DEFAULT LRESOURCE : "device:filename.filetype"LDESCRIPTION="my description"[] Values for "device:filename.filetype" are: device flash, flash1, disk, or disk1 (case insensitive) filename A unique identifier for a file, such as the macro ID for a PCL macro, the symbol set ID for a PCL symbol set, the font ID for a PCL font, or the actual file name for data, Type 1 fonts, and demo files as shown on the Directory. The filename is case sensitive. filetype The identifier that categorizes the file, such as p5macro for PCL macros or p5symset for PCL symbol sets. Using the DEFAULT command to modify any of these variables forces a write to flash or disk if resource collection mode is set to On before the command is executed. The DEFAULT command causes a PJL Reset.