Lexmark C530DN Technical Reference - Page 115

3-18 PJL Table 3-3: Common Variables for Both Printer Languages (Continued) Variable POWERSAVETIME (DEFAULT only) QTY (SET only) REPRINT RESOLUTION RESOURCESAVE (DEFAULT only) RET TIMEOUT Function Power Save time, in minutes Collation Collated Copies (QTY) Jam Recovery Print Resolution Resource Save Print Quality Enhancement Technology (PQET) Print timeout, in seconds Selections Factory Default 0 to 120 (Model specific) 20 0 to 240 (Model specific) (0 indicates the Power Saver Time feature is disabled.) The time the printer remains idle before it enters Power Save mode when POWERSAVE is On. Note: If a value greater than 120 or 240 is specified by a SET or DEFAULT command, the value is changed to 120 or 240 based on the printer model. 0 to 999 0 Used to request the number of collated copies of a print job. If Collation - Collated Copies (QTY) is not equal to 0, a DINQUIRE or INQUIRE returns the numerical setting for QTY. If Collation - Collated Copies (QTY) is set to Off, a DINQUIRE or INQUIRE returns 0. Note: If a value greater than 999 is specified by a SET or DEFAULT command, the value is changed to 999. ON, OFF, AUTO AUTO 300, 600, 1200 600 ON, OFF, AUTO ON indicates Resource Save is set On. OFF, AUTO (Model specific) OFF and AUTO indicate Resource Save is set to Off. See "Table B-1: Common Variables for Both Printer Languages" on page B-1 for the default value of your printer. OFF, DARK, MEDIUM, LIGHT, ON ON If this value is set through PJL, the same value is returned on a PJL inquiry. DARK, MEDIUM, LIGHT, and ON values indicate that PQET is On. OFF indicates PQET is Off. 0 to 255 90 The time the printer remains idle before the job is forced to print. Note: If a value greater than 255 is specified by a SET or DEFAULT command, the value is changed to 255.