Lexmark C530DN Technical Reference - Page 69

2-57 PCL Table 2-16: Page Control (Continued) Command / Parameters l ESC& #D 1 1 line/inch 2 2 lines/inch 3 3 lines/inch 4 4 lines/inch 6 6 lines/inch (Default) 8 8 lines/inch 12 12 lines/inch 16 16 lines/inch 24 24 lines/inch 48 48 lines/inch ESC&a#G 0 Next Side 1 Front Side 2 Back Side l ESC& #P # = number from 0 to 14 0 = default page length is used (1 to 14 = new page length is set) ESC&k#W 5 6 Turn Text Scale Mode OFF Turn Text Scale Mode ON Function / Result Set Line Spacing (Alternative Method) Specifies VMI in lines per inch. Notes: • For some printers, you can change the default VMI from the printer operator panel or through MarkVision Professional by using the Lines Per Page menu item. See your printer documentation for more information. • Unsupported values are ignored. • Use of this command alters any earlier VMI setting. Duplex Page Side Selection Specifies which physical page side to print next when duplex printing. Note: When the duplex option is not installed, this command causes a conditional page eject. Set Page Length Sets the logical page length in number of lines. Notes: • This command is sent at the beginning of a page in a print job and prior to any printable data. • When the command is sent, the current page is closed and printed. • Unsupported values are ignored. Text Scale Mode Allows 66 lines of text at six lines per inch to print on an effective page length of 10 1/2 inches. Notes: • Unsupported values are ignored. • The command is ignored when the printer is in landscape mode.