Lexmark C530DN Technical Reference - Page 66

2-54 PCL Table 2-16: Page Control Command / Parameters l ESC& #A Paper 1 2 3 4, 10 6, 11 13, 25 15 26 27 12, 45 46 101 Executive Letter Legal Folio Ledger (11 x 17) A5 Paper Statement A4 Paper A3 Paper B5 Paper B4 Paper Custom Paper/Universal Envelopes 80 81 89 90 91 99, 100 600 l ESC& #H Monarch 7 3/4 Commercial 10 Commercial 9 DL C5 B5 Envelope Other Envelope 0 Active Source or Eject Page 1 Tray 1 (Default) 2 Manual Paper Feed 3 Manual Envelope Feed 4 Tray 2 5 Tray 3 6 Optional Envelope Feeder 7 Auto Select 8 Multipurpose Feeder 20 Tray 4 21 Tray 5 62 Optional Paper Source ESC&f#G # = number of Decipoints (1 Decipoint = 1/720 inch) ESC&f#F # = number of Decipoints (1 Decipoint = 1/720 inch) Function / Result Set Page Size Selects the physical size of the paper, which also determines the logical page dimensions. See the tables beginning on page 2-1 for the paper and envelope dimensions your printer supports. If the requested page size is not in the requested source or if no source is requested, sources are checked for the requested size in the following order: multipurpose feeder, tray 1, tray 2, tray 3, tray 4, tray 5, and envelope feeder. Notes: • When the printer receives the page size command, any partially formatted pages are printed, and the cursor position and margins are reset. • Duplex printing is not supported on any envelope. • The size loaded in the active source is checked to see if it matches the requested size. If the multipurpose feeder is configured as Cassette or Manual, the same applies; however, if the multipurpose feeder is configured as First and media is loaded in the multipurpose feeder, then, regardless of media size, it is the source used until it is empty. Paper Source Selects the paper feed source. Note: If the paper source is changed for the back of a duplexed page, a blank back page prints, the paper source changes, and the information for the back side of the page is printed on the front side of a page sent from the new paper source. Set Universal Width Sets the width of the Universal size in decipoints. Set Universal Height Sets the height of the Universal size in decipoints.