Lexmark MX722 Forms and Bar Code Card P4.2 Technical Reference - Page 13
PCL 5 emulation escape sequences, Command, Function parameters
View all Lexmark MX722 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Lexmark Confidential until announced PCL 5 emulation: HP 13 PCL 5 emulation escape sequences Command Esc(s#P or AEC)s#P Function parameters Determines the HRT location printed with the bar code. 0-Use the default value. 1-Do not print the text. 2-Print the text embedded. 3-Print the text half embedded. 4-Print the text below bar code. 5-Print the text above bar code. Add the preceding values to the following numbers to produce the intended effect: 10-Prints UPC-A checksum on the middle left of the bar code instead of the lower left. 10-Prints start and stop "*" characters with Code 3 of 9 text. 20-Formats German Postal bar codes. 100-Prints the checksum character with text. Note: For UPC-E symbologies, checksum characters are printed if HRT is specified. The checksum characters are printed half-height when 100 is added to the p parameter. For example: Esc(s13p24670T Selects Code 3 of 9 with HRT half embedded and start/stop "*" characters. Because parameters v, b, s, and h are not specified, their values default to: • v-0.04 in. • b1, s1-0.01 in. • b2, s2-0.03 in. • h-Automatically sized Courier Bold.