Lexmark MX722 Forms and Bar Code Card P4.2 Technical Reference - Page 26
PDF417 bar code descriptors HP compatibility mode, Typeface, Value, Default
View all Lexmark MX722 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Lexmark Confidential until announced PCL 5 emulation: HP 26 PDF417 bar code descriptors (HP compatibility mode) TypefaceEsc (s#T Value Default 24850T P parameter Esc(s#P N/A 0 Optional. Determines the ECC level. Range is 0-8. B parameter1 #1 0† Esc(s#1, #2B Optional. Determines the number of rows for the symbol. Range is 3-90. #2 0† Optional. Determines the number of columns for the symbol. Range is 1-30. S parameter1 #1 2 Esc(s#1, #2B #2 1 Optional. Determines the X value of the symbol aspect ratio. Optional. Determines the Y value of the symbol aspect ratio. #3‡ 0 0-Parameters #1 and #2 equal the size needed for the PDF417 symbol (default). 1-Parameters #1 and #2 can be set to a mandatory size for the PDF417 symbol. #4 0 0-The PDF417 symbol is not truncated (default). 1-The PDF417 symbol is truncated on its right side. 1 Use the #b1, #b2 parameters to specify the desired number of rows and columns. You can also use the #s1, #s2 parameters to specify the aspect ratio that you want. Use only one technique. If both types of parameters appear in a bar code selection escape sequence, then use the type appearing last in the sequence to select the symbol size. † Aspect ratio values are used if the #b parameter is not used to set rows and columns manually. ‡ The default value 0 sets the symbol to the necessary size to capture the encoding data. The optional value 1 uses the values in parameters #1 and #2 to set a mandatory symbol size, while holding a fewer amount of data. The symbol size is larger than necessary for the encoding data. In printing PDF417 symbols, the parameter values sent using this technique follow the same rules for parameter values sent when using the Transfer Bar Code Descriptor. In relation to the fields of the Lexmark bar code descriptor for PDF417, the following correspondences exist when using this technique: ECC level Specified by #p parameter Units enumeration for X dimension Fixed at 2 (600 dpi) X dimension (in X dimension units) Fixed at 6 Y ratio Fixed at 3 Truncated Specified by#s4 parameter Rows Specified by #b1 parameter Columns Specified by #b2 parameter