Lexmark MX722 Forms and Bar Code Card P4.2 Technical Reference - Page 27
QR Code bar code descriptors HP compatibility mode, MaxiCode bar code descriptors, Typeface, Default
View all Lexmark MX722 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Lexmark Confidential until announced PCL 5 emulation: HP 27 Aspect ratio X Aspect ratio Y ECC by percentage Specified by #s1 parameter Specified by #s2 parameter Fixed at 0 QR Code bar code descriptors (HP compatibility mode) Typeface Esc(s#P P parameter Esc(s#P B parameter Esc(s#B S parameter Esc(s#S Default 0 10 0 24860T Model 1 24861T Model 2 Optional. Determines the ECC level as follows: 0-Default ECC level (error correction level M of 15%). 1-Low ECC / high density level (L), 7% damage allowed. 2-Standard ECC level (M), 15% damage allowed. 3-High reliability / ECC level (Q), 25% damage allowed. 4-Ultra high reliability / ECC level (H), 30% damage allowed. Optional. Specifies module height and width in dots (1/600 in.). The minimum value is 1. Optional. Determines the encoding mode as follows: 0-Use the default value (Automatic: JIS/ShiftJIS). 1-Numeric (0-9). 2-Alphanumeric (0-9, uppercase A to Z, space; and the symbols 3-JIS 8-bit character set. 4-Kanji character set (shifted JIS). MaxiCode bar code descriptors Only the first rule differs between data sent using this technique and data sent using the Lexmark Bar Code Data command to print MaxiCode symbols. The input data must start with the following fields: label number, number of labels, and mode. The three fields are one digit in length and are terminated with either a comma or group separator (ASCII 29). In relation to the fields of the Lexmark bar code descriptor for MaxiCode, the following correspondences exist when using this technique: Mode Specified in the data Typeface Esc (s#T value 24800