Marantz SR5002 SR4002_Rear_Panel_Drawing - Page 30

Setup

Page 30 highlights

SETUP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM This unit incorporates an on-screen menu system, which makes various operations possible by using the cursor (3, 4, 1, 2) and ENTER buttons on the remote control or on the front panel. Note: To view the on-screen displays, make certain you have made a connection from the Monitor Out jack on the rear panel to the composite, S-Video, component video input of your TV or projector. (see page20) 1. Press the AMP button of the remote controller.(This step is not needed when operating the setup menus from the unit itself.) 2. Press the MENU button on the remote controller or set to display the "SETUP MAIN MENU" of the OSD menu system. There are 8 items in the SETUP MAIN MENU. 3. Select a desired sub-menu with the 3 or 4 cursor buttons, and press the ENTER button to enter. The display will change to the selected sub-menu. You can lock the condition of setup to each sub-menu with the 1 or 2 or cursor buttons. Note: If you desire to adjust any sub-menu, you need to set it to UNLOCKED. 4. If you desire to exit from this menu system, press the EXIT button, or move the cursor to EXIT and press the ENTER button. When only HDMI components are connected, the OSD menu will not be displayed on the screen. 1-1 INPUT SETUP FUNC:MODE :DIG:HDMI:COMP TV :AUTO : 5 : - : DVD :AUTO : 1 : 1 : 1 VCR :AUTO : 3 : 3 : 3 DSS :AUTO : 2 : 2 : 2 AUX1:AUTO : F : - : - MAIN NEXT EXIT * For the SR4002, "-" is displayed for TV DIG and VCR HDMI. 1-2 INPUT SETUP FUNC:MODE :DIG:HDMI:COMP TAPE:AUTO : - : : CD/R:AUTO : 4 : : AUX2:AUTO : - : : MAIN RETURN EXIT AUTO SETUP START CANCEL AUTO SPEAKERS CHECK : SPEAKERS LEVEL : SPEAKERS DISTANCE : SPEAKERS SIZE : MAIN RETURN NEXT EXIT 2-1 SPEAKER SETUP SPEAKER SETUP : AUTO SET MICROPHONE MAIN NEXT EXIT MANUAL 2-2 SPEAKERS SIZE SUBWOOFER : YES FRONT L/R : LARGE CENTER : SMALL SURROUND L/R : SMALL SURR.BACK : 2CH SURR.BACK SIZE : SMALL LPF/HPF : 100Hz BASS MIX : BOTH MAIN NEXT EXIT 2-3 SPEAKERS DISTANCE DISTANCE UNIT : ft FRONT L : 10.0 ft FRONT R : 10.0 ft CENTER : 10.0 ft SURR.L : 10.0 ft SURR.R : 10.0 ft SUB W : 10.0 ft SURR.B L : 10.0 ft SURR.B R : 10.0 ft MAIN RETURN NEXT EXIT 2-3 SPEAKERS DISTANCE DISTANCE UNIT : m FRONT L : 3.0 m FRONT R : 3.0 m CENTER : 3.0 m SURR.L : 3.0 m SURR.R : 3.0 m SUB W : 3.0 m SURR.B L : 3.0 m SURR.B R : 3.0 m MAIN RETURN NEXT EXIT SETUP MAIN MENU 1. INPUT SETUP :UNLOCK 2. SPEAKER SETUP:UNLOCK 3. PREFERENCE :UNLOCK 4. SURROUND :UNLOCK 5. PLIIx MUSIC :UNLOCK 6. CSII :UNLOCK 7. 7.1 CH. INPUT:UNLOCK 8. MULTI ROOM :UNLOCK EXIT * "8. MULTI ROOM" is displayed only with the SR5002. 3 PREFERENCE STANDBY MODE : ECONOMY TV-AUTO : DISABLE OSD INFO : ENABLE BILINGUAL : MAIN VIDEO CONVERT HDMI : ENABLE DC TRIGGER MAIN EXIT * "DC TRIGGER" is displayed only with the SR5002. 3-1 VIDEO CONVERT TV : ON DVD : ON VCR : ON DSS : ON AUX1 : ON MAIN RETURN EXIT SR5002 only 3-2 DC TIRGGER SETUP DC TRIG DISABLE TV : DVD : VCR : DSS : AUX1 : TAPE : CD/R : AUX2 : TUNER: 7.1CH: MAIN RETURN EXIT 2-4 SPEAKERS LEVEL TEST MODE : MANUAL FRONT L : 0 dB CENTER : 0 dB FRONT R : 0 dB SURR.R : 0 dB SURR.B R : 0 dB SURR.B L : 0 dB SURR.L : 0 dB SUB W : 0 dB MAIN RETURN EXIT 4 SURROUND SURR.MODE :AUTO HT-EQ :OFF LFE LEVEL : MAIN EXIT 5 PLIIx MUSIC PARAMETER PARAMETER : DEFAULT PANORAMA : OFF DEMENSION : 0 CENTER WIDTH : 3 MAIN EXIT 6 CSII PARAMETER TRUBASS SRS DIALOG : 0 : 0 MAIN EXIT 7 7.1 CH. INPUT LEVEL VIDEO-IN : LAST FRONT L : 0 dB CENTER : 0 dB FRONT R : 0 dB SURR.R : 0 dB SURR.B R : 0 dB SURR.B L : 0 dB SURR.L : 0 dB SUB W : 0 dB MAIN EXIT SR5002 only 8 MULTI ROOM AUDIO : DVD SLEEP TIMER : OFF MULTI:OUT : STEREO MULTI:OFF MSPK : VOL : VARI LEVEL : -90dB --- MAIN ROOM STATUS --- VIDEO:DVD AUDIO:DVD MAIN EXIT 27 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

27
ENGLISH
SETUP
After all components are connected, initial setup
must be performed.
ON SCREEN DISPLAY MENU SYSTEM
This unit incorporates an on-screen menu system,
which makes various operations possible by using
the cursor (
3
,
4
,
1
,
2
) and
ENTER
buttons on the
remote control or on the front panel.
Note:
To view the on-screen displays, make certain you have
made a connection from the Monitor Out jack on the
rear panel to the composite, S-Video, component video
input of your TV or projector. (see page20)
1.
Press the
AMP
button of the remote
controller.(This step is not needed when
operating the setup menus from the unit itself.)
2.
Press the
MENU
button on the remote controller
or set to display the “SETUP MAIN MENU” of
the OSD menu system.
There are 8 items in the SETUP MAIN MENU.
3.
Select a desired sub-menu with the
3
or
4
cursor buttons, and press the
ENTER
button
to enter. The display will change to the selected
sub-menu. You can lock the condition of setup
to each sub-menu with the
1
or
2
or cursor
buttons.
Note:
If you desire to adjust any sub-menu, you need to set
it to UNLOCKED.
4.
If you desire to exit from this menu system,
press the
EXIT
button, or move the cursor to
EXIT
and press the
ENTER
button.
When only HDMI components are connected, the
OSD menu will not be displayed on the screen.
4 SURROUND
SURR.MODE :
AUTO
HT-EQ
:OFF
LFE LEVEL :
MAIN
EXIT
3-2 DC TIRGGER SETUP
DC TRIG
DISABLE
TV
:
TAPE :
DVD
:
CD/R :
VCR
:
AUX2 :
DSS
:
TUNER:
AUX1 :
7.1CH:
MAIN RETURN
EXIT
3-1 VIDEO CONVERT
TV
:
ON
DVD
: ON
VCR
: ON
DSS
: ON
AUX1 : ON
MAIN RETURN
EXIT
3 PREFERENCE
STANDBY MODE
:
ECONOMY
TV-AUTO
: DISABLE
OSD INFO
: ENABLE
BILINGUAL
: MAIN
VIDEO CONVERT
HDMI
: ENABLE
DC TRIGGER
MAIN
EXIT
1-2 INPUT SETUP
FUNC:MODE :DIG:HDMI:COMP
------------------------
TAPE:AUTO : - :
:
CD/R:AUTO : 4 :
:
AUX2:AUTO : - :
:
MAIN
RETURN
EXIT
2-1 SPEAKER SETUP
SPEAKER SETUP :
AUTO
SET MICROPHONE
MAIN
NEXT
EXIT
2-3 SPEAKERS DISTANCE
DISTANCE UNIT :
m
FRONT L
:
3.0
m
FRONT R
: 3.0 m
CENTER
: 3.0 m
SURR.L
: 3.0 m
SURR.R
: 3.0 m
SUB W
: 3.0 m
SURR.B L
: 3.0 m
SURR.B R
: 3.0 m
MAIN
RETURN
NEXT
EXIT
2-3 SPEAKERS DISTANCE
DISTANCE UNIT : ft
FRONT L
:
10.0
ft
FRONT R
: 10.0 ft
CENTER
: 10.0 ft
SURR.L
: 10.0 ft
SURR.R
: 10.0 ft
SUB W
: 10.0 ft
SURR.B L
: 10.0 ft
SURR.B R
: 10.0 ft
MAIN
RETURN
NEXT
EXIT
AUTO SETUP
START
CANCEL
SPEAKERS CHECK
:
SPEAKERS LEVEL
:
SPEAKERS DISTANCE
:
SPEAKERS SIZE
:
MAIN
RETURN
NEXT
EXIT
1-1 INPUT SETUP
FUNC:MODE :DIG:HDMI:COMP
------------------------
TV
:
AUTO
: 5 : -
: -
DVD :AUTO : 1 : 1
: 1
VCR :AUTO : 3 : 3
: 3
DSS :AUTO : 2 : 2
: 2
AUX1:AUTO : F : -
: -
MAIN
NEXT
EXIT
5 PLIIx MUSIC PARAMETER
PARAMETER
:
DEFAULT
PANORAMA
: OFF
DEMENSION
:
0
CENTER WIDTH :
3
MAIN
EXIT
7 7.1 CH. INPUT LEVEL
VIDEO-IN
:
LAST
FRONT L
:
0 dB
CENTER
:
0 dB
FRONT R
:
0 dB
SURR.R
:
0 dB
SURR.B R
:
0 dB
SURR.B L
:
0 dB
SURR.L
:
0 dB
SUB W
:
0 dB
MAIN
EXIT
6 CSII PARAMETER
TRUBASS
:
0
SRS DIALOG
: 0
MAIN
EXIT
2-4 SPEAKERS LEVEL
TEST MODE
:
MANUAL
FRONT L
:
0 dB
CENTER
:
0 dB
FRONT R
:
0 dB
SURR.R
:
0 dB
SURR.B R
:
0 dB
SURR.B L
:
0 dB
SURR.L
:
0 dB
SUB W
:
0 dB
MAIN
RETURN
EXIT
2-2 SPEAKERS SIZE
SUBWOOFER
:
YES
FRONT L/R
: LARGE
CENTER
: SMALL
SURROUND L/R
: SMALL
SURR.BACK
: 2CH
SURR.BACK SIZE
: SMALL
LPF/HPF
: 100Hz
BASS MIX
: BOTH
MAIN
NEXT
EXIT
SETUP MAIN MENU
1. INPUT SETUP
:
UNLOCK
2. SPEAKER SETUP:UNLOCK
3. PREFERENCE
:UNLOCK
4. SURROUND
:UNLOCK
5. PLIIx MUSIC
:UNLOCK
6. CSII
:UNLOCK
7. 7.1 CH. INPUT:UNLOCK
8. MULTI ROOM
:UNLOCK
EXIT
8 MULTI ROOM
AUDIO
:
DVD
SLEEP TIMER
: OFF
MULTI:OUT
: STEREO
MULTI:OFF
MSPK
:
VOL
: VARI
LEVEL
: -90dB
--- MAIN ROOM STATUS ---
VIDEO:DVD
AUDIO:DVD
MAIN
EXIT
*
“DC TRIGGER” is displayed only with the SR5002.
*
“8. MULTI ROOM” is displayed only with
the SR5002.
SR5002 only
SR5002 only
*
For the SR4002, “–” is displayed for TV DIG
and VCR HDMI.
AUTO
MANUAL