Marantz SR5002 SR4002_Rear_Panel_Drawing - Page 38

VIDEO CONVERT When this function is activated, the video or S-video signal can be emitted from the video, S-video or component video output terminal. To activate this function, select VIDEO CONVERT in PREFERENCE menu and set ENABLE. Notes: • The component video signal is emitted only from component video output terminal. When the video equipment is connected by component terminal, connect the monitor and SR4002/SR5002 by the component terminal. • This function is unavailable for the REC out terminal. • This function is unavailable for the still picture, fast forward and reverse playing of the video component. • If, while attempting to use the video convert feature, the SR4002/SR5002 cannot synchronize with the display device, "NO SIGNAL" appears on the monitor, or noise is generated, this feature cannot be used. All of these signs are caused by equipment incompatibility; there is nothing wrong with the SR4002/SR5002. In such case, set VIDEO CONVERT in the PREFERENCE menu to DISABLE. Also, connect the video input signal to the display device via the MONITOR OUT terminal under VIDEO and the S-video input signal to the display device via the MONITOR OUT terminal under S-VIDEO. Example: Monitor is connected with the component. SR5002 only AV SURROUND RECEIVER SR5002 INPUT SELECTOR VOLUME MULTI MULTI SPEAKER STANDBY POWER ON/STANDBY SETUP MIC PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE DOWN UP MUTE ATT DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R VIDEO component Monitor is connected with the video or S-video. SR5002 only AV SURROUND RECEIVER SR5002 INPUT SELECTOR VOLUME MULTI MULTI SPEAKER STANDBY POWER ON/STANDBY SETUP MIC PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE DOWN UP MUTE ATT DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R VIDEO S-VIDEO Monitor is connected with the video or component. SR4002/SR5002 AV SURROUND RECEIVER SR4002 INPUT SELECTOR VOLUME 7.1 CH INPUT S.SPEAKER B STANDBY POWER ON/STANDBY SETUP MIC PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE DOWN UP MUTE ATT DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R S-VIDEO VIDEO component SR4002/SR5002 AV SURROUND RECEIVER SR5002 INPUT SELECTOR VOLUME MULTI MULTI SPEAKER STANDBY POWER ON/STANDBY SETUP MIC PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE DOWN UP MUTE ATT DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R component VIDEO S-VIDEO HDMI AV SURROUND RECEIVER SR5002 INPUT SELECTOR VOLUME MULTI MULTI SPEAKER STANDBY POWER ON/STANDBY SETUP MIC PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE DOWN UP MUTE ATT DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R HDMI VIDEO S-VIDEO component AV SURROUND RECEIVER SR5002 INPUT SELECTOR VOLUME MULTI MULTI SPEAKER STANDBY POWER ON/STANDBY SETUP MIC PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE DOWN UP MUTE ATT DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R VIDEO S-VIDEO component HDMI Notes of OSD menu: HDMI: OSD menu is not displayed. VIDEO/S-VIDEO/component: VIDEO CONVERT of HDMI is not possible, thus the OSD menu is not displayed. The signal cannot be converted from the component to the video or S-video. Notes of OSD menu: • The setup menu can be displayed through all video out (COMPONENT, S-VIDEO, VIDEO). • The setting informations (e.g. volume setting) are displayed through all video out when the VIDEO CONVERT function are set ON. Note: No setting information is displayed when the signal is emitted from the COMPONENT IN to COMPONENT OUT. • The setting informations (e.g. volume setting) are displayed through the S-VIDEO or VIDEO out when the VIDEO CONVERT function are set DISABLE. When the S-VIDEO and VIDEO outputs are used simultaneously, the setting informations are displayed through the S-VIDEO out only. 35 ENGLISH