NEC UN552S User Manual English

NEC UN552S Manual

Get NEC UN552S PDF manuals and user guides View all NEC UN552S manuals
Add to My Manuals
Save this manual to your list of manuals

NEC UN552S manual content summary:

  • NEC UN552S | User Manual English - Page 1
    User's Manual Large Format Display MultiSync UN462A MultiSync UN462VA MultiSync UN492S MultiSync UN492VS MultiSync UN552A MultiSync UN552S MultiSync UN552VS MODEL: UN462A, UN462VA, UN492S, UN492VS, UN552A, UN552S, UN552VS The model name and serial number can be found in the rating label on the rear
  • NEC UN552S | User Manual English - Page 2
    Wireless Remote Control (Optional 22 Chapter 3 Connections Wiring Diagram 25 Connections 25 External Video Connections 26 Connecting to a Personal Computer 26 Connecting to a Media Device with HDMI 27 Internal Video Sources 28 Media Player 29 Option Boards for the Monitor 30 Connecting
  • NEC UN552S | User Manual English - Page 3
    Out Connection 73 Setting the Remote Control ID Function 74 Chapter 7 External Control Connecting Interfaces 77 Commands 77 Supporting HDMI CEC Command 79 Controlling the Monitor via RS-232C 80 Controlling the Monitor via LAN 81 Multiple Monitors Connection 82 Network Setting by Using
  • NEC UN552S | User Manual English - Page 4
    Specifications UN462A 97 UN462VA 98 UN492S 99 UN492VS 100 UN552A 101 UN552S 102 UN552VS 103 Appendix A External Resources Appendix B OSD Controls List INPUT 107 PICTURE 107 AUDIO 112 SCHEDULE 112 MULTI-INPUT 114 OSD 117 MULTI-DISPLAY 118 DISPLAY PROTECTION 122 CONTROL 123 OPTION
  • NEC UN552S | User Manual English - Page 5
    Lesser General Public License (LGPL), and others. For more information on each software, see "readme.pdf" inside the "about GPL&LGPL" folder on the NEC website.  NOTE: (1) The contents of this user's manual may not be reprinted in part or whole without permission. (2) The contents of this user
  • NEC UN552S | User Manual English - Page 6
    to avoid any problems.  CAUTION: Please use the power cord provided with this monitor in accordance MultiSync monitor with its AC 125-240 V power supply, use a power supply cord that matches the power supply voltage of the AC power outlet being used.  NOTE: This product can only be serviced
  • NEC UN552S | User Manual English - Page 7
    the monitor outdoors. • If glass is broken, handle with care. • This monitor is equipped with temperature control fans disconnect your monitor from the wall outlet and refer servicing to qualified service personnel: If the monitor does not operate normally by following operating instructions. *1: The
  • NEC UN552S | User Manual English - Page 8
    • Adjust the monitor's brightness, contrast and sharpness controls to enhance readability. • Get regular eye checkups. • Use the preset Size and Position controls with standard input signals. • Use the preset color settings. • Use non-interlaced signals. • Do not view the primary color blue on a
  • NEC UN552S | User Manual English - Page 9
    monitoring, together with individual characterization and calibration of each display during production, to provide an unparalleled level of color control settings. HDR video is also supported. - NEC Display Wall Calibrator (NDWC) and MultiProfiler supported Multiple color modes can be easily
  • NEC UN552S | User Manual English - Page 10
    cannot be used or installed without the Tabletop Stand or other mounting accessory for support. For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC standard mounting procedures could result in damage to the equipment or injury to
  • NEC UN552S | User Manual English - Page 11
    than the monitor's screen area, on the table before laying the monitor face down. 2. Install the remote control (Optional) batteries The remote control is powered user's manual of your equipment for further information.  NOTE: Do not connect/disconnect cables when turning on the monitor or other
  • NEC UN552S | User Manual English - Page 12
    that enough power is supplied to the monitor. Please refer to the "Power Supply" in the specification (See "UN462A" on page 97, "UN462VA" on page 98, "UN492S" on PROTECT] menu (see page 122). It is recommended that the [FAN CONTROL] setting also be checked [ON]. • [DATE & TIME] and [SCHEDULE SETTINGS
  • NEC UN552S | User Manual English - Page 13
    in accordance with the installation instructions. Carefully inspect the location where the unit is to be mounted. Not all walls or ceilings are capable of supporting the weight of the unit. The weight of this monitor is provided in the specifications (see "UN462A" on page 97, "UN462VA" on page 98
  • NEC UN552S | User Manual English - Page 14
    with pins. When you use pins, please refer to the instructions below. 1. Connect all vertical position monitors using pins. 2. Connect each vertical monitor using pins. For UN552S/UN552VS: • Please locate the spacer at the edge of rear side monitor. • Attach it by using the double-sided tape on the
  • NEC UN552S | User Manual English - Page 15
    in a spot on the wall or ceiling strong enough to support the monitor. • To prevent the monitor from falling off from the wall or ceiling, NEC strongly recommends using a safety wire. • Prepare the monitor using mounting accessories, such as hook, eyebolt, or mounting parts, and then secure the
  • NEC UN552S | User Manual English - Page 16
    Mounting location  CAUTION: • The ceiling or wall must be strong enough to support the monitor and mounting accessories. • DO NOT install in locations where a door or gate can hit the unit. • DO NOT install in areas where the unit will
  • NEC UN552S | User Manual English - Page 17
    Be sure the unit is mounted to a solid structure within the ceiling, such as a support beam. Secure the monitor using bolts, spring lock washers, washer and nut. • DO NOT mount to areas that have no supporting internal structure. DO NOT use wood screws or anchor screws for mounting. DO NOT mount the
  • NEC UN552S | User Manual English - Page 18
    face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily support the weight of the monitor. *1: UN552A/UN552S/UN552VS: WM-55UN-L or WM-55UN-P. UN492S/UN492VS: WM-49UN-L. UN462A/UN462VA: WM-46UN-L3 or WM-46UN-P2. Using a Wall Mount Adapter If
  • NEC UN552S | User Manual English - Page 19
    the monitor stand, handle the unit with care to avoid pinching your fingers. For installation, follow the instructions support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided clamps and screws. For the UN462A/UN462VA
  • NEC UN552S | User Manual English - Page 20
    Installing an Option Board 1. Turn off the main power switch. 2. Place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily support the weight of the monitor.  NOTE: To avoid scratching the LCD panel, always place a soft cloth,
  • NEC UN552S | User Manual English - Page 21
    . Set the sensor unit close to the back side.  NOTE: Depending on the type of the monitor, there are limitations for mounting. For installation, follow instructions below to avoid damage to the monitor. For the UN462A/UN462VA/UN552A: • When installing the sensor unit on the upper side of the
  • NEC UN552S | User Manual English - Page 22
    Chapter 2 Parts Name and Functions This Chapter Includes: >> "Control Panel" on page 19 >> "Terminal Panel" on page 20 >> "Wireless Remote Control (Optional)" on page 22 English−18
  • NEC UN552S | User Manual English - Page 23
    an exit button to close the OSD when on the main menu. I Remote Control Sensor and Power Indicator Receives the signal from the remote control (when using the wireless remote control). See page 34. Glows blue when the monitor is in active mode*1. Green and Amber blink alternately when the [SCHEDULE
  • NEC UN552S | User Manual English - Page 24
    .  NOTE: This connector does not support analog input. J RS-232C IN (D-Sub 9-pin) Connect RS-232C input from external equipment, such as a computer, in order to control RS-232C functions. See page 80. K REMOTE Use the optional sensor unit by connecting it to your monitor. See page 17.  NOTE: Do
  • NEC UN552S | User Manual English - Page 25
    (USB Type-B). USB CM1 (2A): Power supply port. USB CM2*1: Service port. Please do not connect devices. Media Player USB: USB storage device remote control, room light sensing and human sensing) Receives the signal from the Remote control. Detects the level of ambient light, allowing the monitor
  • NEC UN552S | User Manual English - Page 26
    which Option Board installed in the monitor. F DISPLAY Button Shows/Hides the information OSD. See page 38. Unlocks the remote control's buttons if they have been decreases the point zoom level. Please refer to the Point Zoom instructions. See page 37. *: When using with an Option Board, the function depends
  • NEC UN552S | User Manual English - Page 27
    picture's picture size. REMOTE ID Button Activates the REMOTE ID function. See monitor. - Button* Activates closed captioning for VIDEO input only. *: When using with an Option Board, the function depends on which Option Board is installed in the monitor. Refer to the Option Board's user's manual
  • NEC UN552S | User Manual English - Page 28
    connections: • Turn off the device's power before connecting it to the monitor. • Refer to the device's user manual for available connection types and instructions for the device. • We recommend turning off the monitor's main power before connecting or disconnecting a USB storage device or microSD
  • NEC UN552S | User Manual English - Page 29
    player or Computer (HDMI) Computer (DisplayPort) Computer (DisplayPort) Second monitor* Computer (Analog) Dotted lines = other signal Solid lines = video /DIGITAL)*2 Media Player USB/microSD COMPUTE MODULE Input button in remote control DVI HDMI1 HDMI2 DisplayPort 1 DisplayPort 2 VGA (RGB/YPbPr)
  • NEC UN552S | User Manual English - Page 30
    preset signal timing for each connection type. Some display cards may not be able to support the required resolution for proper image reproduction with the selected connection. The monitor will show the proper image by automatically adjusting the factory preset timing signal.
  • NEC UN552S | User Manual English - Page 31
    ] or [DisplayPort2] by the remote control AUDIO INPUT button. • To display individual images at each connected monitors with the DisplayPort OUT connector, and streaming media, from being copied or broadcast illegally.  NOTE: • Supports 1920x1080 (60 Hz), 1080p, 1080i, 720p@50Hz/60Hz, 576p@50Hz,
  • NEC UN552S | User Manual English - Page 32
    CEC Command" on page 79. When supported, the monitor's optional Remote Control can be used to control the HDMI media device. The remote's CEC enabled buttons are: 1 (9), 2 (4), 3 (:), 5 (
  • NEC UN552S | User Manual English - Page 33
    microSD memory card in the FAT32 format or FAT16 format. Refer to the computer's instruction manual or help file on how to format a microSD memory card.  NOTE: Up to 32GB microSDHC is supported. The monitor is not guaranteed to work with all microSD memory cards sold commercially. microSD with
  • NEC UN552S | User Manual English - Page 34
    computer's instruction user's manual or Help file on how to format a USB storage device. Please use a USB storage device with this monitor in accordance supported size listed below, please use a USB extension cable. Under 44 mm USB memory Extension cable Under 10.5 mm  NOTE: • If the monitor
  • NEC UN552S | User Manual English - Page 35
    Make sure to use a USB cable that supports 2 A. Enable [USB POWER] in the [USB] settings of the [CONTROL] menu in the OSD. See page not work. Please check the user's manual of your computer or device. • Before turning off the main power switch of the monitor or shutting down Windows®, please turn
  • NEC UN552S | User Manual English - Page 36
    Chapter 4 Basic Operation This Chapter Includes: >> "Power ON and OFF Modes" on page 33 >> "Operating Range for the Optional Remote Control" on page 34 >> "Using Power Management" on page 34 >> "Showing the Information OSD" on page 35 >> "Switching Between Picture Modes" on page 35 >> "Setting the
  • NEC UN552S | User Manual English - Page 37
    during the period of time you set. (no network signal input) Glowing red Turn off the monitor by the remote control or the monitor button. Turn on the monitor by the remote control or the monitor button. *1: Time setting for [AUTO POWER SAVE] is available at [POWER SAVE] (See page 122).  NOTE
  • NEC UN552S | User Manual English - Page 38
    Operating Range for the Optional Remote Control Point the top of the remote control toward the monitor's remote control sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.) from the remote control sensor, or at a horizontal and vertical angle of within 30°
  • NEC UN552S | User Manual English - Page 39
    , IP Address, Monitor ID, etc. Press the DISPLAY button on the remote control to bring up remote control to cycle through the SpectraView Engine picture modes from 1 to 5. The picture modes are pre-configured with settings for general use. See "Advanced Color Adjustment" on page 48 for instructions
  • NEC UN552S | User Manual English - Page 40
    the Aspect Ratio Press the ASPECT button on the remote control to cycle through the options available for the current ➙ NORMAL *1: This function depends on which Option Board is installed in the monitor. *2: This input is available when the optional Raspberry Pi Compute Module Interface Board
  • NEC UN552S | User Manual English - Page 41
    10 times its size. 1. Press the SET/POINT ZOOM button on the remote control. A magnifier icon appears on-screen. 2. Move the magnifier to the area image returns to the normal size after changing the input signal or when the monitor is powered off. • [POINT ZOOM] deactivates if the [ASPECT] changes
  • NEC UN552S | User Manual English - Page 42
    Press  or  to navigate to a sub-menu. Goto Adjustment Key Guide Press SET/POINT ZOOM to select an option. Return Close Press  or , + or - to select the function or setting to be adjusted. Press MENU or EXIT. Remote Control Control Panel Press INPUT/SET to select an option. Press MENU
  • NEC UN552S | User Manual English - Page 43
    . CONTROL: Set network information, security, power, etc. OPTION: Select settings related to an Option Board if installed. SYSTEM: View the monitor information (model, serial number, carbon footprint), firmware version, mac address, or perform a factory reset. COMPUTE MODULE: This menu is only
  • NEC UN552S | User Manual English - Page 44
    instructions on connecting USB storage device or microSD memory card. Change to the Media Player by pressing the MEDIA PLAYER button on the optional remote control for copying content to a microSD memory card connected to the monitor. Displays the file list for a connected microSD memory card.
  • NEC UN552S | User Manual English - Page 45
    the next set of files in the folder. Shows the settings screen for configuring the Media Player. THUMBNAILS/ ICON SORT EJECT ENT Button (remote control) Switches between displaying thumbnails or icons for files. Changes the file display order to sort by name (filename), type (file extension), date
  • NEC UN552S | User Manual English - Page 46
    first file you want to display then press the SET/POINT ZOOM button on the remote control. This starts the manual slideshow and the selected file will be displayed on-screen. To change the image press the the remote control to display the next file in the directory. The images are displayed in the
  • NEC UN552S | User Manual English - Page 47
    English Configuring the Slideshow Settings Use the  + - and SET/POINT ZOOM buttons on the remote control to navigate the Media Player menus. 1. Navigate to the SETTINGS icon and press SET/POINT ZOOM button. 2. Navigate to [PLAY MODE] and press SET/POINT
  • NEC UN552S | User Manual English - Page 48
    button the remote control to select the monitor and possible corruption of the connected device's data files, the monitor's main power switch should be off before making connections. • Only one USB storage device can be recognized with this monitor. External hub is not supported with this monitor
  • NEC UN552S | User Manual English - Page 49
    MP3) AAC-LC (Abbreviation: AAC), LPCM MP3, WMV Standard, WMA 9/10 Professional MP3, AAC MP3, AAC MP3, AAC BGM (Background Music) - Supported formats File extension .wav .mp3 Audio codec LPCM MP3 Additional Information Item Resolution Video bit date Audio sampling rate Audio bit rate Conditions
  • NEC UN552S | User Manual English - Page 50
    Chapter 5 Advanced Operation This Chapter Includes: >> "Creating a Power Schedule" on page 47 >> "Advanced Color Adjustment" on page 48 >> "Multi-Picture Mode" on page 55 >> "Setting Security and Locking the Monitor Controls" on page 59 >> "Media Player Settings" on page 63 English−46
  • NEC UN552S | User Manual English - Page 51
    English Creating a Power Schedule The schedule function allows the monitor to automatically change between power on and standby modes at different times. To program the schedule: 1. Enter the [SCHEDULE] menu. a Highlight [SCHEDULE SETTINGS] using the 
  • NEC UN552S | User Manual English - Page 52
    of two modes: On or Off To enable or disable the SpectraView Engine using the remote control: 1. Press the MENU button. 2. Navigate to the [PICTURE] menu then to [SPECTRAVIEW color vision deficiency as well as the ability to select the monitor's output color gamut. To change the settings in each SVE
  • NEC UN552S | User Manual English - Page 53
    point may be desirable. Color setting for use with "on set shooting" where the monitor's screen will be captured by the camera and should match the studio set's incandescent ). Programmable preset for MultiProfiler and other supported software. The preset name can be changed by software. English−49
  • NEC UN552S | User Manual English - Page 54
    to display, the OSD characters are changed to green. Allows you to manually select the brightness level of grayscale. sRGB: Gamma setting for sRGB. L . Programmable: A programmable gamma curve can be loaded using optional NEC software. Custom: Set a custom value for Peak luminance. CUSTOM
  • NEC UN552S | User Manual English - Page 55
    manually and each reading must be entered into the monitor via the OSD using the remote control. [VALIDATION] and [WHITE COPY] are not available.  NOTE: Other color sensor models and types are not supported managing a large number of monitors, the NEC Display Wall Calibrator software is
  • NEC UN552S | User Manual English - Page 56
    , if using a near-range colorimeter device, measurements must be taken manually with the device and the CIE Y/x/y values individually entered via the OSD using the remote control. Y is in units of cd/m2. Depending on the monitor usage and other factors, performing a Self Calibration at least once
  • NEC UN552S | User Manual English - Page 57
    must have been previously performed before this function is available on the OSD menu. USB color sensor B A Monitor A - SOURCE monitor of white point to copy. Monitor B - This monitor which performs a copy.  NOTE: When adjusting the color of multiple displays, we recommend that you perform
  • NEC UN552S | User Manual English - Page 58
    blue level controls. To turn SpectraView Engine off, see page 48 for instructions. There are modes: Press the PICTURE MODE button on the wireless remote control to cycle through the modes, or select the mode on which Option Board is installed in the monitor. *2: This input is available when the
  • NEC UN552S | User Manual English - Page 59
    to each other (Picture-By-Picture). The instructions in this section guide you through configuring Multi-Picture Mode in the monitor's OSD menu. These settings can also be configured using the monitor's web controls. The function names and location in the web controls are the same as the OSD menu
  • NEC UN552S | User Manual English - Page 60
    Position - use the + or - remote control buttons to move the active picture window. • Picture Aspect - adjust the aspect ratio for the active picture window. Additional settings in the Multi-Input OSD menu: Keep Multi-Picture Mode - select this option to have the monitor remain in Multi-Picture mode
  • NEC UN552S | User Manual English - Page 61
    see the input you want to use for the sub picture, refer to the tables below to see if your inputs configuration is supported. DisplayPort = 1.1a/HDMI = MODE1 Main picture DisplayPort1 DisplayPort2 DVI HDMI1 HDMI2 VGA (RGB) VGA (YPbPr) VIDEO OPTION MP Sub picture DisplayPort1 DisplayPort2 DVI
  • NEC UN552S | User Manual English - Page 62
    DisplayPort = 1.2/HDMI = MODE1 Main picture DisplayPort1 DisplayPort2 DVI HDMI1 HDMI2 VGA (RGB) VGA (YPbPr) VIDEO OPTION MP Sub picture DisplayPort1 DisplayPort2 DVI HDMI1 HDMI2 VGA (RGB) VGA (YPbPr) Video OPTION MP Connector DisplayPort1 (DAISY CHAIN IN) DisplayPort2 DVI-D HDMI1 (
  • NEC UN552S | User Manual English - Page 63
    password • Enabling password security • Locking the remote control buttons • Locking the monitor Control Panel buttons  NOTE: The instructions in this section describe locking access to the display controls. Other security settings available for this monitor are described in the related sections
  • NEC UN552S | User Manual English - Page 64
    does not prompt for a password when using the remote control POWER ON and STANDBY buttons or the button on the monitor control panel. • [CONTROL LOCK] - the password is required to use any of the remote control buttons or buttons on the monitor. • [BOTH LOCK] - the password is required for both
  • NEC UN552S | User Manual English - Page 65
    Buttons The [IR LOCK SETTINGS] prevent the monitor from being controlled using the remote control. Enabling the [IR LOCK SETTINGS] does not lock the buttons the monitor control panel. MULTI-INPUT CONTROL: NETWORK INFORMATION LAN CHANGE PASSWORD SECURITY IR LOCK SETTINGS KEY LOCK SETTINGS DDC/CI
  • NEC UN552S | User Manual English - Page 66
    Panel Buttons The [KEY LOCK SETTINGS] prevent the monitor from being controlled using the buttons on the monitor Control Panel. Enabling the [KEY LOCK SETTINGS] does not lock the buttons on the remote control. MULTI-INPUT CONTROL: NETWORK INFORMATION LAN CHANGE PASSWORD SECURITY IR LOCK SETTINGS
  • NEC UN552S | User Manual English - Page 67
    remote control, or select the MP input in the OSD INPUT menu. Use the  + - and SET/POINT ZOOM buttons on the remote control or [BEST FIT]. Selects [AUTO] or [MANUAL]. Sets interval time. Check the check box to videos in the selected folder when the monitor is turned on with MP as the selected
  • NEC UN552S | User Manual English - Page 68
    the monitor model name and cannot be changed. PASSWORD Create a password for accessing the microSD memory card. A password is not required. If no password is set, any user/person can access and copy files to the microSD memory card. Select OK then press SET/POINT ZOOM button on the remote control
  • NEC UN552S | User Manual English - Page 69
    is displaying the Media Player home screen, USB window or SD CARD window, and no buttons have been pressed on the remote control or monitor control panel during the interval period you set. Menu ENABLE Function Check the checkbox to enable [SHIFT TO NO SIGNAL]. INTERVAL Set the time between
  • NEC UN552S | User Manual English - Page 70
    while copying files may corrupt the data. • If you press the STANDBY button on the remote control or the button on the monitor while the LED indicator is blinking red, the monitor goes to standby after completing the copy function.  NOTE: If the connection to a shared folder fails, an error
  • NEC UN552S | User Manual English - Page 71
    while copying files may corrupt the data. • If you press the STANDBY button on the remote control or the button on the monitor while the LED indicator is blinking red, the monitor goes to standby after completing the copy function. • Only file formats for still images, motion video files, and
  • NEC UN552S | User Manual English - Page 72
    SD-CARD VIEWER Web Controls Buttons 1. CHOOSE FILE Choose File opens a file browser to select a file to copy to the microSD memory card. Pressing Open in the file browser shows
  • NEC UN552S | User Manual English - Page 73
    Media Player, you can search from any monitor's main web controls to display all supported monitors on the network. 1. Input the monitor's IP address in the web browser's address field. Press the DISPLAY button on the remote control to show the monitor's Information OSD on-screen, which displays the
  • NEC UN552S | User Manual English - Page 74
    Chapter 6 Multi-Monitor Setup This Chapter Includes: >> "Connecting Multiple Monitors" on page 71 >> "Video Out Connection" on page 73 >> "Setting the Remote Control ID Function" on page 74 English−70
  • NEC UN552S | User Manual English - Page 75
    image to be expanded and displayed over multiple screens (up to 100) through a distribution amplifier. Manually input the number of horizontal and vertical monitor in the video wall, position of the monitor in the wall, and turn on or off Tile Compensation. When tilting HDCP content, please refer
  • NEC UN552S | User Manual English - Page 76
    by setting of [H MONITORS], [V MONITORS] and [POSITION] in TILE MATRIX. [MANUAL] - Sets delay value to every monitors. • [V SCAN REVERSE saved to all inputs in the monitor. • [ID CONTROL] - sets the monitor ID and group IP for the current monitor. When the monitors LAN ports are chained together,
  • NEC UN552S | User Manual English - Page 77
    option boards which outputs DisplayPort signal. For HDMI Out • Select either the HDMI1, DVI, MP, or OPTION input for the monitor to output a signal from HDMI OUT. • This monitor's signal output function supports contents protected by HDCP. HDCP content can be distributed across multiple connected
  • NEC UN552S | User Manual English - Page 78
    and DVDs, television broadcast, and streaming media services. Setting the Remote Control ID Function The optional remote control can be used to control up to 100 individual MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the
  • NEC UN552S | User Manual English - Page 79
    using the keypad to input the REMOTE CONTROL ID number (1-100). The REMOTE ID NUMBER should match the MONITOR ID number of the monitor to be controlled. 3. Point the remote control towards the remote sensor of the desired monitor and press the REMOTE ID SET button. The MONITOR ID number is shown in
  • NEC UN552S | User Manual English - Page 80
    external device There are two options to connect an external device to control the monitor. NEC Display Wall Calibrator or NaViSet Administrator allows you to control the monitor settings and get the monitor status, including calibration information. • RS-232C terminal. Connecting an external device
  • NEC UN552S | User Manual English - Page 81
    sequence of encoded bytes that includes support for controlling almost all monitor functions. • ASCII Control commands: This uses simple "English-like syntax" control commands using ASCII, for performing many 30 45 30 41 02 30 30 36 30 30 30 30 46 03 04 0d or 01 30 41 30 45 30 41 02 31 31 30 36 30
  • NEC UN552S | User Manual English - Page 82
    44 30 30 30 32 03 0a 0d ASCII Control command This monitor supports control command, which is listed in the "External_Control.pdf" (See page 104), but also supports common ASCII control command, which is used for controlling the NEC monitor or projector from a connected PC. For further information
  • NEC UN552S | User Manual English - Page 83
    the optional wireless remote control, HDMI CEC supported devices also go into standby at the same time. If the monitor goes into standby while an HDMI CEC supported device is recording, the device remains on. Please refer to the user's manual supplied with the HDMI CEC supported device for further
  • NEC UN552S | User Manual English - Page 84
    " on page 81. To control the monitor via commands sent from a computer connected with an RS-232C cable, please use the control command. Instructions for the control command can be found in the Control Command Diagram (see page 77) or the "External_Control.pdf". See page 104. Interface PROTOCOL
  • NEC UN552S | User Manual English - Page 85
    input/output Pin No 1 2 3 4 5 6 7 8 9 Name NC RXD TXD NC GND NC NC NC NC D-SUB 9P (Monitor side) 5 1 6 9 This monitor uses RXD, TXD and GND lines for RS-232C control. Controlling the Monitor via LAN Connecting to a Network Using a LAN cable allows you to specify the Network Settings and the
  • NEC UN552S | User Manual English - Page 86
    /IP to automatically assign unique IDs to each monitor (see page 120) before trying to control a monitor by manually specifying the ID number. Master Monitor Connector IN OUT RS-232C REMOTE LAN1 (DAISY CHAIN IN) LAN2 (DAISY CHAIN OUT) Sub Monitors Connector IN OUT LAN1 (DAISY LAN2 (DAISY
  • NEC UN552S | User Manual English - Page 87
    monitor to a network allows for remote control of the monitor from a computer connected to the same network. The IP address and subnet mask of the monitor the host name of the monitor has been set to "pd.nec.co.jp", access is gained to the network setting by specifying http://pd.nec.co.jp/index.html
  • NEC UN552S | User Manual English - Page 88
    link on the left column below HOME. REMOTE CONTROL Enable an operation to control the monitor equivalent to the keys on the remote control. OSD Menu Settings in the Monitor Web controls Select one of the links on the left side of the monitor web controls to configure the settings available in the
  • NEC UN552S | User Manual English - Page 89
    . NOTE: Consult your network administrator if you have any trouble. Set your IP address for the monitor connected to the network when [MANUAL] is selected for [IP SETTING]. Set your subnet mask data for the monitor connected to the network when [MANUAL] is selected for [IP SETTING]. Set your default
  • NEC UN552S | User Manual English - Page 90
    FAN CONTROL] in the [DISPLAY PROTECTION]. Or please contact your supplier. No signal Please check "No picture" in "Troubleshooting". The Proof of Play log memory size is 1 more hour. Please get a log by using PD external command. See page 90. The battery is empty. Please connect the monitor to
  • NEC UN552S | User Manual English - Page 91
    HOME. The SNMP protocol is used to get status information and to control a monitor directly via the network. Version: SNMP v1 SNMP v2c Authenticated plaintext by supported by an AMX's NetLinx control system. HINT: When using a device that supports AMX Device Discovery, all AMX NetLinx control
  • NEC UN552S | User Manual English - Page 92
    monitor supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed and controlled from a computer or a controller is connected with the monitor. Up to 60 alphanumeric characters can be used. Network Service Settings Click on "NETWORK SERVICE" on the left column
  • NEC UN552S | User Manual English - Page 93
    service at your company, that information can be entered here. Note that the MEMO text cannot be set from the monitor's OSD menu using the remote control. application is only available for Android devices. Please refer to the NEC website for more information.  NOTE: • Sensor position: See page
  • NEC UN552S | User Manual English - Page 94
    of Play This function allows sending of messages for the current status of the monitor by self-diagnosis. For the Proof of Play function including self-diagnosis, please see the "External_Control.pdf". See page 104. Check item  INPUT Message DVI, DisplayPort1, DisplayPort2, HDMI1, HDMI2, OPTION
  • NEC UN552S | User Manual English - Page 95
    English Chapter 8 Troubleshooting This Chapter Includes: >> "Screen Image and Video Signal Issues" on page 92 >> "Hardware Issues" on page 93 >> "Image Persistence" on page 95 English−91
  • NEC UN552S | User Manual English - Page 96
    monitor are powered on. • Make sure that a supported resolution has been selected on the display card or system being used. If in doubt, please refer to the user's manual of the display controller persistence, put the monitor into standby via remote control or turn the monitor's main power off for
  • NEC UN552S | User Manual English - Page 97
    Power Switch on the monitor. No Sound • Check to see if the audio cable is properly connected. • Check to see if [MUTE] is activated. Use the remote control to enable or disable the Mute function. • Check to see if [VOLUME] is set to a minimum. • Check to see if the computer supports an audio signal
  • NEC UN552S | User Manual English - Page 98
    device user's manual. • Check that the USB upstream port on the monitor is connected The monitor may go into standby mode when a connected CEC supported monitor for cool down for few minutes then turn it on again. • The monitor could be in standby. Press the power on button on the remote control
  • NEC UN552S | User Manual English - Page 99
    , NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle, or turn off the monitor's intervals. • When not in use, please turn off the monitor via remote control, or use the Power Management function of the PC, or
  • NEC UN552S | User Manual English - Page 100
    Chapter 9 Specifications This Chapter Includes: >> "UN462A" on page 97 >> "UN462VA" on page 98 >> "UN492S" on page 99 >> "UN492VS" on page 100 >> "UN552A" on page 101 >> "UN552S" on page 102 >> "UN552VS" on page 103 [Notice] About
  • NEC UN552S | User Manual English - Page 101
    46"/ Control Remote IN: Stereo Mini Jack 3.5 mm Ø Port: microSD card. Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB: Media Player/Firmware
  • NEC UN552S | User Manual English - Page 102
    x 2 Remote IN: Stereo Mini Jack 3.5 mm Ø Port: microSD card. Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB: Media Player/Firmware update
  • NEC UN552S | User Manual English - Page 103
    Control Remote IN: Stereo Mini Jack 3.5 mm Ø Port: microSD card. Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB: Media Player/Firmware
  • NEC UN552S | User Manual English - Page 104
    Control Remote IN: Stereo Mini Jack 3.5 mm Ø Port: microSD card. Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB: Media Player/Firmware
  • NEC UN552S | User Manual English - Page 105
    Control Remote IN: Stereo Mini Jack 3.5 mm Ø Port: microSD card. Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB: Media Player/Firmware
  • NEC UN552S | User Manual English - Page 106
    Control Remote IN: Stereo Mini Jack 3.5 mm Ø Port: microSD card. Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB: Media Player/Firmware
  • NEC UN552S | User Manual English - Page 107
    Control Remote IN: Stereo Mini Jack 3.5 mm Ø Port: microSD card. Up to 32 GB microSDHC is supported. USB1 (SENSOR): USB 2.0 Downstream port USB2: USB 2.0 Upstream port USB CM1 (2A): Power supply port, 5 V/2 A (max.) USB CM2: USB service port for maintenance Media Player USB: Media Player/Firmware
  • NEC UN552S | User Manual English - Page 108
    Russia, Middle East and Africa: https://www.nec-display-solutions.com Japan: https://www.nec-display.com/jp/ Additional Documentation "NEC LCD Monitor - External Control" PDF document This document defines the communications protocol for externally controlling and querying the display via either RS
  • NEC UN552S | User Manual English - Page 109
    of a supported external color sensor. Please contact an authorized NEC dealer or see the NEC Display Solutions website in your region for purchase information and availability. NaViSet Administrator software This free software is an advanced and powerful network based control, monitoring and asset
  • NEC UN552S | User Manual English - Page 110
    "SCHEDULE" on page 112 >> "MULTI-INPUT" on page 114 >> "OSD" on page 117 >> "MULTI-DISPLAY" on page 118 >> "DISPLAY PROTECTION" on page 122 >> "CONTROL" on page 123 >> "OPTION" on page 128 >> "SYSTEM" on page 128 >> "COMPUTE MODULE" on page 129 Default values can be provided on request. English−106
  • NEC UN552S | User Manual English - Page 111
    example, this allows print previews or cinematic or color grading effects to be performed within the monitor itself. This feature is used with supporting software. 3D LUTs are uploaded to the monitor via application software. ON: Enables/Activates the 3D LUT function for the selected picture mode
  • NEC UN552S | User Manual English - Page 112
    COLOR TRIM*1 With these controls, the standard color Gamma correction is handled by the LCD panel. 2.2 Typical monitor gamma for use with a computer. 2.4 Typical gamma 3 A programmable gamma curve can be loaded using optional NEC software. AUTO HDR SELECT HDMI input only GAMMA correction
  • NEC UN552S | User Manual English - Page 113
    - button to move left. V POSITION VGA (RGB), VGA (YPbPr) inputs only Controls the vertical position of the image within the display area of the LCD. Press + RGB) input only If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution
  • NEC UN552S | User Manual English - Page 114
    signal is VGA (YPbPr), VIDEO or MP. *5: When you select OPTION for signal input, this function depends on which Option Board is installed in the monitor. English−110
  • NEC UN552S | User Manual English - Page 115
    the color reproduction and evens out the non-uniformity in luminance of the monitor. Changes the orientation of the image to left/right, up/down, 't needed, they can be skipped when using the Picture Mode button on the remote control to toggle modes. For example, if [3] is set for [NUMBER OF PICT
  • NEC UN552S | User Manual English - Page 116
    page 47). Press the buttons to navigate and change the schedule settings. Press the SET/POINT ZOOM button on the remote control or Input change buttons on the monitor to select settings.  NOTE: • The [DATE & TIME] needs to be set before adding schedules. • Schedules you configure are saved when
  • NEC UN552S | User Manual English - Page 117
    holiday. NOTE: If you are modifying an existing holiday, make sure to highlight SET then press SET on the remote to save the changes. If you press the EXIT button on the remote control without saving the changes, the settings will be discarded. WEEKEND SETTING Defines which days of the week are
  • NEC UN552S | User Manual English - Page 118
    order for the [SCHEDULE] function to operate. After setting the date and time, press the SET button on the remote control to save the settings. Press EXIT to cancel the changes. NOTE: If the monitor's main power has been turned off for two weeks, the [DATE & TIME] setting goes back to the default
  • NEC UN552S | User Manual English - Page 119
    the input to configure for the multi-picture settings and be controlled by the remote control. ACTIVE FRAME Turns off or on the red frame that shows OPTION] for input, this function depends on which Option Board installed in the monitor. *4: This function is not available if [PIP] is set at [MULTI
  • NEC UN552S | User Manual English - Page 120
    SENSING] is [ENABLED] in the [AUTO DIMMING] settings in the [CONTROL] menu. NONE The monitor does not search for video signal on the other input connections. If video signal is lost on the current input, or if the monitor is manually switched to an input that does not have video signal, the
  • NEC UN552S | User Manual English - Page 121
    English MULTI-INPUT MENU DisplayPort BIT RATE HDMI VIDEO LEVEL SIGNAL FORMAT HDMI1, HDMI2, DisplayPort1, DisplayPort2, COMPUTE MODULE, OPTION only RESET Selects the DisplayPort mode [1.1a] or [1.2]. DisplayPort 1.1a is selected, [SST] is set automatically. DisplayPort 1.2 is selected, set [SST] or
  • NEC UN552S | User Manual English - Page 122
    when displaying the OSD Menu. The Key Guide is aligned to the monitor's button control panel and does not move if the OSD POSITION changes. It is a visual guide to indicate the position of the buttons so that features can be easily adjusted when not using a remote control. NOTE: This function is not
  • NEC UN552S | User Manual English - Page 123
    pdf" file on the NEC website. Highlight and press SET to select each setting that needs to be copied to the other monitors is for manually configuring the remote control. Selects part of the displayed image and displays it on the full screen. Adjust the frame size by [H MONITORS] and [V MONITORS
  • NEC UN552S | User Manual English - Page 124
    available Group IDs, labeled A-J. Refer to the External_Control.pdf file (see page 104) for the monitor's command codes. Automatically sets all of the monitor IDs and/or IP addresses in a LAN chain. Highlight [START] and press SET on the remote control to show the [AUTO ID/IP SETTING] menu.  NOTE
  • NEC UN552S | User Manual English - Page 125
    into standby while [AUTO ID/IP SETTING] is in progress. AUTO ID/IP RESET Resets all of the monitor IDs and/or IP addresses in a LAN chain. Highlight START and press SET on the remote control to show the [AUTO ID/IP RESET] menu. RESET ITEM Select which item to reset for all
  • NEC UN552S | User Manual English - Page 126
    table (see page 94). Please refer to the monitor's specifications (see "UN462A" on page 97, "UN462VA" on page 98, "UN492S" on page 99 manually. The [FAN SPEED] can be adjusted between LOW and HIGH. Use the + and - button on the remote control to adjust the maximum internal temperature the monitor
  • NEC UN552S | User Manual English - Page 127
    CONTROL MENU NETWORK INFORMATION LAN IP SETTING IP ADDRESS SUBNET MASK DEFAULT GATEWAY DNS DNS PRIMARY DNS SECONDARY CHANGE PASSWORD Shows the current network settings. Configures the monitor's network settings either automatically or manually. NOTE: When changing the LAN settings, it will take
  • NEC UN552S | User Manual English - Page 128
    on the display's button panel or remote control. The password is required for both powering on the monitor and controlling the monitor using the button panel or remote control. Prevents the monitor from being controlled by the wireless remote control. When [ACTIVATE] is selected, all settings
  • NEC UN552S | User Manual English - Page 129
    activated.  NOTE: • • [KEY LOCK SETTINGS] is a function intended only for the buttons of the monitor. This function does not lock out access to the buttons on the remote control. To activate the control key lock function, press the  button and the  button and hold down simultaneously for more
  • NEC UN552S | User Manual English - Page 130
    CONTROL MENU ROOM LIGHT SENSING*1, *2 The backlight of the LCD panel can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The purpose
  • NEC UN552S | User Manual English - Page 131
    same level of CEC integration and control, or they may only provide support for their products. The CEC device goes into standby at the same time as the monitor when the STANDBY button is pressed on the remote control, or when the button is pressed on the monitor. NOTE: The connected HDMI CEC device
  • NEC UN552S | User Manual English - Page 132
    the operating system cannot be shut down manually. SLOT2 CH SETTING Selects signal type according right half. If the internal PC does not support either one of the signal types, the existing any options. Shows the monitor's current firmware version. Shows the monitor's [MAC ADDRESS]. All items
  • NEC UN552S | User Manual English - Page 133
    SERVICE MENU SETTING LOCK USB BOOT MODE IR SIGNAL MONITOR CONTROL manually controlled via the [POWER SUPPLY] setting, the HTTP interface to the display, or via a LAN command to the display. Requires a password to set options in the [SERVICE the forwarding of IR remote control signals. Enables or
  • NEC UN552S | User Manual English - Page 134
    product" on page 131 >> "Energy Saving" on page 131 >> "WEEE Mark (European Directive 2012/19/EU and amendments)" on page 131 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company's top priorities in trying to minimize the burden placed
  • NEC UN552S | User Manual English - Page 135
    can be found on our following websites: https://www.nec-display-solutions.com/p/greenvision/en/greenvision.xhtml (in Europe) https://www.nec-display.com (in Japan) https://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced energy saving capability. When a Display Power
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
User’s Manual
Large Format Display
MultiSync UN462A
MultiSync UN462VA
MultiSync UN492S
MultiSync UN492VS
MultiSync UN552A
MultiSync UN552S
MultiSync UN552VS
MODEL: UN462A, UN462VA, UN492S, UN492VS, UN552A, UN552S, UN552VS
The model name and serial number can be found in the rating label on the rear side of monitor.