NEC UN552S User Manual English - Page 77
Video Out Connection
View all NEC UN552S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
English • Video daisy chaining. We strongly recommend using the same monitor model for all monitors in the connected daisy-chain. MONITORS POSITION is different from ID. Please refer to the figure1. ID:1 1 ID:6 4 ID:7 7 ID:2 2 ID:5 5 ID:8 8 ID:3 3 ID:4 6 ID:9 9 Figure 1 H MONITORS: 3 V MONITORS: 3 POSITION: 4, 5, 6 Video Out Connection Main picture DisplayPort1 DisplayPort2 DVI HDMI1 HDMI2 VGA (RGB) VGA (YPbPr) Video OPTION MP Connector DisplayPort1 (DAISY CHAIN IN) DisplayPort2 DVI-D HDMI1 (DAISY CHAIN IN) HDMI2 (CEC) VGA (RGB, YPbPr) VIDEO Option Board Slot (SLOT2 (DP)) Option Board Slot (SLOT2 (HDMI)) - DisplayPort Yes HDMI No No No No No No No No Yes No Yes Yes No No No No No No No Yes Yes NOTE: The output of Media Player signal (MP) is capable only between the same models. For connecting multiple monitors with HDMI cable • Using the same display model. • Set the same ([MODE1] or [MODE2]) at [HDMI] in [TERMINAL SETTINGS] in all connected multiple monitors. For DisplayPort Out • Select either the DisplayPort1 or OPTION input for the monitor to output a signal from DisplayPort Out. • This monitor's signal output function supports contents protected by HDCP. HDCP content can be distributed across up to 3 connected monitors. • When using an Option Board, please set [SLOT2 CH SETTING] to [CH1] then set [SLOT2 CH SELECT] to DisplayPort. See page 128. NOTE: Please use slot2 type option boards which outputs DisplayPort signal. For HDMI Out • Select either the HDMI1, DVI, MP, or OPTION input for the monitor to output a signal from HDMI OUT. • This monitor's signal output function supports contents protected by HDCP. HDCP content can be distributed across multiple connected monitors as described below: • HDCP 1: Up to 8 monitors / HDCP 2.2: Up to 5 monitors. • The time until image is displayed depends on the number of connected monitors. • Without HDCP: Up to 9 monitors. NOTE: • Depending on the device you use, number of monitor connection will change. • When displaying an image in a multi-monitor setting, do not disconnect cables from the monitors. When you disconnect cables, please turn the main power off first. • When using an option, please set [SLOT2 CH SETTING] to [CH1] then set [SLOT2 CH SELECT] to TMDS. See page 128. NOTE: Please use slot2 type option boards which outputs HDMI signal. English−73