NEC UN552S User Manual English - Page 51

English Creating a Power Schedule The schedule function allows the monitor to automatically change between power on and standby modes at different times. To program the schedule: 1. Enter the [SCHEDULE] menu. a Highlight [SCHEDULE SETTINGS] using the  and  buttons. b Press the SET/POINT ZOOM or the + button to enter the Settings menu. c Highlight the desired schedule number and press SET/POINT ZOOM button. d The box next to the number will turn yellow. The schedule can now be programmed. 2. Use the  button to highlight the [POWER]. Use the + and - buttons to set [ON]. To set a power off schedule, set [OFF]. 3. Use the  button to highlight the [TIME]. Use the + and - buttons to set the time. MULTI-INPUT SCHEDULE: SCHEDULE SETTINGS SCHEDULE LIST HOLIDAY SETTINGS WEEKEND SETTINGS DATE & TIME DAYLIGHT SAVINGS OFF TIMER RESET OPTION C MODULE SETTINGS: 1 POWER: TIME: INPUT: PIC. MODE: ON 04 : 03 DVI STANDARD DATE YEAR: 2016 MONTH: JAN DAY: 01 EVERY DAY EVERY WEEK MON TUE WED THU FRI STAT SUN WEEKDAY WEEKEND HOLIDAY Select Goto Adjustment Return Close 4. Use the  and  buttons to highlight [INPUT]. Use the + and - buttons to choose the input source. 5. Use the  and  buttons to highlight [PIC. MODE]. Use the + and - buttons to choose the picture mode. 6. Use the  button to select [DATE], [EVERY DAY], [EVERY WEEK], [WEEKDAY], [WEEKEND] or [HOLIDAY]. Press the SET/ POINT ZOOM button on a menu which is suitable for the schedule. If the schedule is to be run on a specific day, choose [DATE] and press the SET/POINT ZOOM button. If the schedule is to be run every day, choose [EVERY DAY] and press the SET/POINT ZOOM button. If a weekly schedule is desired, choose the days of the week using the  and  buttons and pressing SET/POINT ZOOM button to select. Then highlight the [EVERY WEEK] option and press SET/POINT ZOOM button. Please set [WEEKDAY], [WEEKEND], or [HOLIDAY] in the same manner.

NOTE: The [WEEKDAY], [WEEKEND], and [HOLIDAY] settings are available under the [SCHEDULE] setting (See page 112). 7. After a schedule is programmed, the remaining schedules can then be set. Press MENU button to leave the OSD or press EXIT button to go back to the previous menu.

NOTE: • If schedules are overlapping, the schedule with the highest number will have priority over the schedule with the lowest number. For example, schedule #7 will have priority over schedule #1.
• If a selected input or picture mode is not available now, the disabled input or picture mode is shown in red. English−47