NEC UN552S User Manual English - Page 91
SNMP Settings, Version°, Community name°, Trap°
View all NEC UN552S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
English SNMP Settings Click on "SNMP" on the left column below HOME. The SNMP protocol is used to get status information and to control a monitor directly via the network. Version: SNMP v1 SNMP v2c Authenticated plaintext by community name, does not return a confirmation message of the trap. Authenticated plaintext by community name, returns a confirmation message of the trap. Community name: The default setting of community name is "public". It is read only. You can set community names for up to 3 settings. Trap: Sending error message to a specified address when an error occurs in the monitor. Check Box Temperature Fan Power Inverter/Backlight No Signal PROOF OF PLAY System Error Explanation Error code Temperature abnormal 0xA0, 0xA1, 0xA2 Cooling fan abnormal 0x80, 0x81 Power abnormal 0x70, 0x71, 0x72, 0x78 Inverter or backlight abnormal 0x90, 0x91 No signal 0xB0 Lower the log storage 0xD0 System error 0xE0 AMX Settings Click on "AMX" on the left column below HOME. AMX BEACON To turn on or off for the detection from AMX Device Discovery when connecting to a network supported by an AMX's NetLinx control system. HINT: When using a device that supports AMX Device Discovery, all AMX NetLinx control systems will recognize the device and download the appropriate Device Discovery Module from an AMX server. Selecting [ENABLE] AMX Device Discovery will detect the device. Selecting [DISABLE] AMX Device Discovery will not detect the device. English−87