NEC UN552S User Manual English - Page 113
Automatically adjusts Screen Size, H position, Clock, Phase and White Level.
View all NEC UN552S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
English PICTURE MENU COLOR*2, *3 COLOR Adjusts the color saturation of the screen. Press + or - button to adjust. COLOR TEMP Adjusts the color temperature of the entire screen. A low color temperature will result in a reddish screen. A high color temperature will make the screen bluish. If TEMPERATURE needs further adjustment, the individual R/G/B/ levels of the white point can be adjusted. To adjust the R/G/B levels, set [CUSTOM] as [COLOR TEMP] selection. NOTE: When [PROGRAMMABLE1], [PROGRAMMABLE2] or [PROGRAMMABLE3] is selected in [GAMMA CORRECTION], this function cannot be changed. COLOR CONTROL Adjusts the hue of the Red, Yellow, Green, Cyan, Blue and Magenta colors individually. Adjust the hue of the specified color. For example, you can change red to yellow or purple. HUE*6 MP, VIDEO inputs only Adjusts the hue for all colors with compatible video input signals. Press + or - button to adjust. CONTRAST*2, *3 Adjusts the image brightness in relationship to the input signal. Press + or - button to adjust. SHARPNESS Adjusts the crispness of the image. Press + or - button to adjust. UHD UPSCALING Controls how non-UHD signal is scaled up to achieve a high-definition effect. ADJUST AUTO SETUP VGA (RGB) input only Automatically adjusts Screen Size, H position, V position, Clock, Phase and White Level. AUTO ADJUST VGA (RGB) input only [H POSITION], [V POSITION] and [PHASE] are adjusted automatically when new timing is detected. H POSITION VGA (RGB), VGA (YPbPr) inputs only Controls the horizontal position of the image within the display area of the LCD. Press + button to move right. Press - button to move left. V POSITION VGA (RGB), VGA (YPbPr) inputs only Controls the vertical position of the image within the display area of the LCD. Press + button to move up. Press - button to move down. CLOCK VGA (RGB) input only Press + button to expand the width of the image on the right of the screen. Press - button to narrow the width of the image on the left of the screen. PHASE VGA (RGB), VGA (YPbPr) inputs only Adjusts the visual "noise" in the image. H RESOLUTION*7 VGA (RGB) input only Adjusts the horizontal size of the image. V RESOLUTION*7 VGA (RGB) input only Adjusts the vertical size of the image. COLOR SYSTEM VIDEO input only The selected Color System depends on the video format of the input signal. AUTO Automatically chooses the Color System setting based on the input signal. NTSC Select a signal format. PAL SECAM 4.43 NTSC PAL-60 INPUT RESOLUTION VGA (RGB) input only If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. After selection, execute [AUTO SETUP] if required. If no problem is detected, the only available option will be [AUTO]. *2: This function is available when [SPECTRAVIEW ENGINE] is set to [OFF]. *3: This function is not available when [sRGB] is selected at [PICTURE MODE]. *6: This function is not available for still image on the MP input. *7: We recommended running [AUTO SETUP] after individually adjusting this option. English−109