NEC UN552S User Manual English - Page 83
Supporting HDMI CEC Command, OSD menu, HDMI CEC command name, Explanation, Setting
View all NEC UN552S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
English Supporting HDMI CEC Command Please connect a CEC supporting device to HDMI2 port. OSD menu HDMI CEC command name Explanation Setting CEC (Consumer Electronics Control) One Touch Play Remote Control Pass Through Power Status System Information When a CEC supported HDMI device is turned on, the monitor connected to the device by an HDMI cable also automatically turns on. After the monitor powers on, [INPUT] automatically switches to the [HDMI2]. If the monitor is turned on when HDMI CEC devices are turned on, it changes the [INPUT] from the current one to [HDMI2]. The monitor's optional wireless remote control button operation can function with HDMI CEC supporting devices. For example, if turning on the monitor by wireless remote control and pressing the play button, a HDMI CEC supporting device can also be turned on and play. Connected HDMI CEC supporting devices obtain the monitor's power status, such as if the monitor is in standby mode or on. This function obtains the information for a connected HDMI CEC supported device (CEC version, Physical Address). In addition, this function copes with the "Change Language function". If the language for the monitor is changed, the language for a connected HDMI CEC supported device is changed to the same language, which is selected for the monitor. For the "Change Language function", it is necessary that the connected HDMI CEC supported device be able to cope with multilanguage. CONTROL: NETWORK INFORMATION LAN CHANGE PASSWORD SECURITY IR LOCK SETTINGS KEY LOCK SETTINGS DDC/CI PING IP ADDRESS RESET AUTO DIMMING POWER INDICATOR NETWORK FUNCTIONS USB CEC RESET CEC ON / OFF AUTO TURN OFF YES / NO AUDIO RECEIVER YES / NO SEARCH DEVICE YES / NO To set the CEC options, please follow the steps below. Press the Menu button to open the OSD. Using the + - buttons, navigate to [CONTROL] to [CEC], then press SET/POINT ZOOM button to enter the CEC options. Use the + - buttons to highlight [ON], then press SET/POINT ZOOM button to enable CEC. AUTO TURN OFF System Standby If the monitor is set to standby using the optional wireless remote control, HDMI CEC supported devices also go into standby at the same time. If the monitor goes into standby while an HDMI CEC supported device is recording, the device remains on. Please refer to the user's manual supplied with the HDMI CEC supported device for further information. Use the buttons to select [AUTO TURN OFF]. Use the + - buttons to highlight [YES], then press the SET/POINT ZOOM button to select [YES]. AUDIO RECEIVER System Audio Control Please set an HDMI CEC audio amplifier between the monitor and an HDMI CEC supported device with an HDMI cable. The Volume button on the optional wireless remote control can control the volume of the connected HDMI CEC audio amplifier. While this function is active, the external speaker connected to the monitor is set to MUTE automatically. Use the buttons to select [AUDIO RECEIVER] then press SET/POINT ZOOM. Use the + - buttons to highlight [YES], then press the SET/POINT ZOOM button to select [YES]. SEARCH DEVICE Device OSD Name Transfer Use the + - buttons to highlight YES, then press the SET/POINT ZOOM button to start the search. Use the buttons to select [SEARCH DEVICE]. Routing Control By selecting a device name, the HDMI CEC supported device input switches to the input you selected. After selecting the device, wireless remote control operation functions for the selected device. This function searches for CEC supported devices on the monitor's HDMI connections. If a CEC device is successfully detected, this function obtains the device's name. The device's name and the HDMI connection it is found on are displayed. This CEC function is supporting Feature Abort. Please refer to Connections (see page 24) for HDMI CEC devices connection. English−79