NEC UN552S User Manual English - Page 121
OSD, MODE2: Max resolution is 3840 x 2160 60 Hz, HDCP 2.2, or HDR.
View all NEC UN552S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
English MULTI-INPUT MENU DisplayPort BIT RATE HDMI VIDEO LEVEL SIGNAL FORMAT HDMI1, HDMI2, DisplayPort1, DisplayPort2, COMPUTE MODULE, OPTION only RESET Selects the DisplayPort mode [1.1a] or [1.2]. DisplayPort 1.1a is selected, [SST] is set automatically. DisplayPort 1.2 is selected, set [SST] or [MST*]. * DisplayPort 1.2 should be selected when using Multi-Stream Transport. Multi-Stream Transport requires a corresponding display card. Contact your supplier for limitations of this function. NOTE: MST is not available with DisplayPort2 signal input. DisplayPort 1.1a is selected at DisplayPort, [HBR] is set automatically. DisplayPort1.2 and SST are selected at DisplayPort, set [HBR] or [HBR2]. DisplayPort1.2 and MST are selected at DisplayPort, [HBR2] is set automatically. Sets the HDMI mode. MODE1: Max resolution is 3840 x 2160 (30 Hz). MODE2: Max resolution is 3840 x 2160 (60 Hz), HDCP 2.2, or HDR. Adjust the gradation range to be displayed according to the video signal to improve the whiteout and blackout of the image. RAW: For computer settings. Show all input signals of 0-255 gray levels. EXPAND: For audio-visual equipment settings. Expands the input signals from 16-235 gray levels to 0-255 gray levels. AUTO: Automatically sets input signals by adjusting connected equipment. NOTE: This function is available only in [HDMI] or [DisplayPort] or [OPTION] and is selected at [INPUT SIGNAL]. Selects the color space setting and RBG for the HDMI/DisplayPort signal. NOTE: If [SLOT2 CH SETTING] is [CH2], this function is grayed out. Resets MULTI INPUT options back to factory settings, except for [INPUT DETECT] (priority of input signals only), [INPUT CHANGE] (INPUT1 and INPUT2), [INPUT SELECT], [PICTURE ASPECT] and [BIT RATE]. OSD OSD MENU LANGUAGE ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL SVENSKA Select the language used by the OSD. OSD TIME OSD POSITION UP DOWN RIGHT LEFT Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds. Determines the location where the OSD appears on the screen. English−117