NEC UN552S User Manual English - Page 19
Installing and Removing the Optional Table Top Stand, Prevent Tipping
View all NEC UN552S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English Installing and Removing the Optional Table Top Stand CAUTION: • Installing and removing the stand must be done by two or more people. • When installing the monitor stand, handle the unit with care to avoid pinching your fingers. For installation, follow the instructions included with the stand or mounting equipment. Use only those devices recommended by the manufacturer. NOTE: • For UN462A/UN462VA/UN492S/UN492VS, ONLY use thumbscrews which are included with the optional table top stand. For UN552A/UN552S/UN552VS, ONLY use thumbscrews which are included in the monitor. • Install the stand so the long end of the feet face forward. Use the ST-322 for the UN462A/UN462VA/UN492S/ UN492VS and the ST-5220 for the UN552A/UN552S/UN552VS. • UN492S/UN492VS: DO NOT use this monitor on the floor with the table top stand. Please use this monitor on a table or with a mounting accessory for support. Optional table top stand Table Soft cloth Prevent Tipping CAUTION: When using the monitor with the optional table top stand, fasten the monitor to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided clamps and screws. For the UN462A/UN462VA/UN492S/UN492VS, the clamps and screws are included with the optional table top stand. UN462A/UN462VA/UN492S/UN492VS UN552A/UN552S/UN552VS 100 mm Screw Holes 325.9 mm Screw Holes Clamp Cord or chain Screw (M4) Clamp Cord or chain Screw (M4) Before attaching the monitor to the wall, make sure that the wall can support the weight of the monitor. CAUTION: Be sure to remove the cord or chain from the wall before moving the monitor. English−15