NEC UN552S User Manual English - Page 115
are disabled: [MULTI PICTURE MODE], [TEXT TICKER], [STILL], [POINT ZOOM]
View all NEC UN552S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
English PICTURE MENU DEINTERLACE ON OFF NOISE REDUCTION VIDEO input only TELECINE HDMI1, HDMI2, VIDEO, VGA (YPbPr), MP inputs only ADAPTIVE CONTRAST*2 HDMI1, HDMI2, VIDEO, VGA (YPbPr), MP inputs only UNIFORMITY*2 ROTATION IMAGE FLIP NONE Selects the IP (Interlace to Progressive) conversion function. NOTE: • [IMAGE FLIP] is not available. • When [SUPER] is selected in [INPUT CHANGE] and displayed, this function cannot be changed. Converts interlaced signals to progressive. Depending on the movie, images may flicker. This is the default setting. Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of image retention. Adjusts the amount of noise reduction. Press + button or - button to adjust. Automatically senses the sources frame rate for optimal picture quality. AUTO: It automatically detects images of 24 frames/sec such as movies, and reduces flicker of images. When selecting [AUTO], please set [DEINTERLACE] to [ON]. OFF: Try if the motion of the image is unnatural. Sets the level of adjustment for dynamic contrast. If HIGH is set, the image is displayed clearly but it makes brightness unstable due to the wide gap in contrast variation. Improves the color reproduction and evens out the non-uniformity in luminance of the monitor. Changes the orientation of the image to left/right, up/down, or rotated. Press + button or - button to select. NOTE: This function is not available when MOTION in [SCREEN SAVER] is [ON]. NOTE When the [ASPECT] is set to [DYNAMIC], the image will be changed to [FULL] before [ROTATE] starts. When an IMAGE FLIP option is selected, except for [NONE], the following functions are disabled: [MULTI PICTURE MODE], [TEXT TICKER], [STILL], [POINT ZOOM] and [TILE MATRIX]. When the input signal is interlaced, the image may be distorted. Normal mode. H FLIP Flips the image left/right. V FLIP Flips the image up/down. 180° ROTATE Rotates the image 180 degrees. OSD FLIP Determines the OSD menu direction. If [ON] is selected, the OSD orientation will be adjusted based on the selection for [IMAGE FLIP]. SPECTRAVIEW ENGINE Select [ON] to activate [SPECTRAVIEW ENGINE] (see page 48). NUMBER OF PICT. MODES Limits the number of selectable Picture Modes. Limiting the number of selectable Picture Modes can be used for the following purposes: • Locking By setting to [1], it will prevent other Picture Modes from being accessed and adjusted. • Skip If there are unused Picture Modes that aren't needed, they can be skipped when using the Picture Mode button on the remote control to toggle modes. For example, if [3] is set for [NUMBER OF PICT. MODES], the available picture modes are [1, 2, 3] and the other modes will be skipped. METAMERISM Improves the white point color matching when the display is used side-by-side with a standard gamut display monitor. This feature compensates for the way the human eye perceives colors slightly differently compared to the scientific instrument used to adjust the display during calibration. This function should be disabled in color critical applications. COLOR STABILIZER (Not available) CALIBRATION Starts the "Stand-Alone Calibration" when using a USB color sensor. RESET Resets all PICTURE settings back to factory settings except for [SPECTRAVIEW ENGINE]. *2: This function is available when [SPECTRAVIEW ENGINE] is set to [OFF]. English−111