Netgear WAG302v2 WAG302v2 Reference Manual - Page 41
SSID and Wireless Security Settings Form, Authentication, WEP Encryption Keys
View all Netgear WAG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual SSID and Wireless Security Settings Form For a new wireless network, print or copy this form and fill in the settings. For an existing wireless network, the person who set up or is responsible for the network can provide this information. Be sure to set the Regulatory Domain correctly as the first step. Store this information in a safe place. • SSID: The Service Set Identification (SSID) identifies the wireless local area network. You may customize it by using up to 32 alphanumeric characters. Write your SSID on the line. SSID Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter card. All wireless nodes in the same network must be configured with the same SSID. • Authentication Circle one: Open System or Shared Key. Choose "Shared Key" for more security. Note: If you select shared key, the other devices in the network will not connect unless they are set to Shared Key and have the same keys in the same positions as those in the WAG302v2. • WEP Encryption Keys For all four data encryption keys, choose the Key Size. Circle one: 64, 128, or 152 bits Key 1 Key 2 Key 3 Key 4 WPA-PSK (Pre-Shared Key)WPA2-PSK (Pre-Shared Key) Record the WPA-PSK key:Record the WPA2-PSK key: Key Key WPA RADIUS Settings For WPA, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary Secondary Port Shared Secret WPA2 RADIUS Settings For WPA2, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary Secondary Port Shared Secret Basic Installation and Configuration v1.0, May 2006 2-19