Netgear WAG302v2 WAG302v2 Reference Manual - Page 91
Configuring Basic Settings, Table C-5, System Information, Basic Setting s
View all Netgear WAG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual helpful for viewing basic system information. Table C-5 System Information Task View hardware information View information about all interfaces View information about the 802.11 radio View information about the Security Profiles View DNS settings Command get system get interface get radio get vap get host Configuring Basic Settings The commands in Table C-6 correspond to the Basic Settings page on the Web UI. Table C-6 Basic Setting s Task Set the Access Point Name Set the Country / Region Enable the DHCP Client Disable the DHCP Client Set a Static IP Address Set a Subnet Mask Set the Default Gateway Command set host id Example: set host id LAB_AP set system country Example: set system country us set management dhcp-client status up set management dhcp-client status down set interface brvlan1 static-ip Example: set interface brvlan1 static-ip 10.10.12.221 set interface brvlan1 static-mask Example: set interface brvlan1 static-mask 255.255.255.0 set static-ip-route gateway Example: set static-ip-route gateway 10.10.12.1 Command Line Reference C-7 v1.0, May 2006