Netgear WAG302v2 WAG302v2 Reference Manual - Page 43

Restricting Wireless Access by MAC Address, Authentication Server Configuration., IP Address.

Get Netgear WAG302v2 - ProSafe Dual Band Wireless Access Point PDF manuals and user guides View all Netgear WAG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual The following list describes the RADIUS Server Settings: • Authentication Server Configuration. This configuration is required for authentication and access control using a RADIUS Server.The IP Address, Port Number and Shared Secret are required for communication with the RADIUS Server. You can configure a Secondary RADIUS Server to use if the Primary RADIUS Server fails. • IP Address. The IP address of the RADIUS Server. The default is 0.0.0.0. • Port Number. The port number of the RADIUS Server. The default is 1812. • Shared Secret. This is shared between the Wireless Access Point and the RADIUS Server while authenticating the supplicant (wireless client). The shared secret can contain up to 63 standard alphanumeric and special characters. The shared secret is case sensitive. • Accounting Server Configuration. This configuration is required for accounting using a RADIUS Server. The IP Address, Port Number and Shared Secret are required for communication with the RADIUS Server. You can configure a Secondary RADIUS Server to use if the Primary RADIUS Server fails. • IP Address. The IP address of the RADIUS Server. The default is 0.0.0.0. • Port Number. Port number of the RADIUS Server. The default is 1813. • Shared Secret. This is shared between the Wireless Access Point and the RADIUS Server while authenticating the supplicant. Restricting Wireless Access by MAC Address To restrict access based on MAC addresses, use the following steps: 1. Connect to the WAG302v2 by entering the IP address of the WAG302v2 into the address field of your Web browser. Basic Installation and Configuration v1.0, May 2006 2-21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
Basic Installation and Configuration
2-21
v1.0, May 2006
The following list describes the RADIUS Server Settings:
•
Authentication Server Configuration.
This configuration is required for authentication and
access control using a RADIUS Server.The IP Address, Port Number and Shared Secret are
required for communication with the RADIUS Server. You can configure a Secondary
RADIUS Server to use if the Primary RADIUS Server fails.
•
IP Address.
The IP address of the RADIUS Server. The default is 0.0.0.0.
•
Port Number.
The port number of the RADIUS Server. The default is 1812.
•
Shared Secret.
This is shared between the Wireless Access Point and the RADIUS Server
while authenticating the supplicant (wireless client). The shared secret can contain up to 63
standard alphanumeric and special characters. The shared secret is case sensitive.
•
Accounting Server Configuration.
This configuration is required for accounting using a
RADIUS Server. The IP Address, Port Number and Shared Secret are required for
communication with the RADIUS Server. You can configure a Secondary RADIUS Server to
use if the Primary RADIUS Server fails.
•
IP Address.
The IP address of the RADIUS Server. The default is 0.0.0.0.
•
Port Number.
Port number of the RADIUS Server. The default is 1813.
•
Shared Secret.
This is shared between the Wireless Access Point and the RADIUS Server
while authenticating the supplicant.
Restricting Wireless Access by MAC Address
To restrict access based on MAC addresses, use the following steps:
1.
Connect to the WAG302v2 by entering the IP address of the WAG302v2 into the address field
of your Web browser.