Netgear WAG302v2 WAG302v2 Reference Manual - Page 81
Appendix B Specifications, Default Factory Settings
View all Netgear WAG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Appendix B Specifications This appendix provides default factory settings and technical specifications for the ProSafe 802.11a/g Dual Band Wireless Access Point WAG302v2. Default Factory Settings You can use the reset button located on the rear panel of your device to reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for three seconds. Your device will return to the factory configuration settings shown in Table B-1. Table B-1 Access Point Default Configuration Settings Feature AP Login User Login URL User Name (case sensitive) Login Password (case sensitive) Ethernet Connection Ethernet MAC Address Port Speed Basic Settings AP Name Country / Region IP Address Subnet Mask DHCP Client Spanning Tree Protocol VLAN (802.1Q) Description 192.168.0.230 admin password See bottom label. 10/100 netgearxxxxxx, where xxxxxx are the last six digits of the wireless access point's MAC address United States (in North America; otherwise, varies by region) 192.168.0.230 255.255.255.0 Disabled Enabled Enabled Specifications B-1 v1.0, May 2006