Netgear WAG302v2 WAG302v2 Reference Manual - Page 66
Modify AP EDCA Parameters., Table 4-2, QoS Queues and Parameters
View all Netgear WAG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual SpectraLink Voice Priority (SVP) is a QoS approach for Wi-Fi deployments. SVP is an open specification that is compliant with the IEEE 802.11b standard. SVP minimizes delay and prioritizes voice packets over data packets on the Wireless LAN, thus increasing the probability of better network performance. • Modify AP EDCA Parameters. Specify the AP EDCA parameters for different types of data transmitted from the WAG302v2 to the wireless client. • Modify Station EDCA Parameters. Specify the Station EDCA parameters for different types of data transmitted from the wireless client to the WAG302v2. If WMM is disabled, you cannot configure Station EDCA parameters. Table 4-2 describes the settings for QoS Queues. Table 4-2 QoS Queues and Parameters QoS Queue Data 0 (Voice) Data 1(Video) Data 2 (best effort) Data 3 (Background) AIFS (Arbitration InterFrame Space) cwMin (Minimum Contention Window) cwMax (Maximum Contention Window) Max. Burst Length Description High priority queue, minimum delay. Time-sensitive data such as VoIP and streaming media are automatically sent to this queue. High priority queue, minimum delay. Time-sensitive video data is automatically sent to this queue. Medium priority queue, medium throughput and delay. Most traditional IP data is sent to this queue. Lowest priority queue, high throughput. Bulk data that requires maximum throughput and is not time-sensitive is sent to this queue (FTP data, for example). Specifies a wait time (in milliseconds) for data frames. Valid values for AIFS are 1 through 255. Upper limit (in milliseconds) of a range from which the initial random backoff wait time is determined. Valid values for the "cwmin" are 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1024. The value for cwMin must be lower than the value for cwMax. Upper limit (in milliseconds) for the doubling of the random backoff value. Valid values for the "cwmax" are 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1024. The value for cwMax must be higher than the value for cwMin. Specifies (in milliseconds) the Maximum Burst Length allowed for packet bursts on the wireless network. A packet burst is a collection of multiple frames transmitted without header information. Valid values for maximum burst length are 0.0 through 999.9. 4-6 Advanced Configuration v1.0, May 2006