Netgear WAG302v2 WAG302v2 Reference Manual - Page 96
RADIUS Server Settings, Table C-10, Security Profile Settings continued
View all Netgear WAG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual Table C-9 Security Profile Settings (continued) Task Command Set Network Authentication to WPA and WPA2 with RADIUS set interface wlan0 security wpa-enterprise set bss wlan0bssvap0 wpa-allowed on set bss wlan0bssvap0 wpa2-allowed on Enable Wireless Client Security set radio wlan0 station-isolation on Separation Disable Wireless Client Security set radio wlan0 station-isolation off Separation Set the VLAN ID for the Security set vap vap0 with radio wlan0 vlan-id Profile RADIUS Server Settings The commands in Table C-10 correspond to the RADIUS Server Settings page on the Web UI. Table C-10 RADIUS Server Settings Task Set the IP Address of the Primary Authentication Server Set the Port Number of the Primary Authentication Server Set the Shared Secret for the Primary Authentication Server Set the IP Address of the Secondary Authentication Server Set the Port Number of the Secondary Authentication Server Set the Shared Secret for the Secondary Authentication Server Set the IP Address of the Primary Accounting Server Command set radius-client primary-authenticationserver set radius-client primary-authenticationport set radius-client primary-authenticationkey set radius-client secondary-authenticationserver set radius-client secondary-authenticationport set radius-client secondary-authenticationkey set radius-client primary-accountingserver C-12 v1.0, May 2006 Command Line Reference