Netgear WNDAP350 WNDAP350 User Manual - Page 109
Appendix A Default Settings and Technical Specifications, Factory Default Settings - default login
UPC - 606449064643
View all Netgear WNDAP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Appendix A Default Settings and Technical Specifications This appendix provides the factory default settings and technical specifications for the ProSafe Dual Band Wireless-N Access Point WNDAP350. Factory Default Settings You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset. • To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the TEST LED blinks rapidly). Your device will return to the factory configuration settings shown in Table A-1 below. • Pressing the reset button for a shorter period of time will simply cause your device to reboot. Table A-1. Access Point Default Configuration Settings Feature AP Login User Login URL User Name (case sensitive) Login Password (case sensitive) Ethernet Connection Static IP Address Ethernet MAC Address Port Speed Local Network (LAN) Lan IP Subnet Mask Gateway Address DHCP Server Description 192.168.0.237 admin password 192.168.0.210 See bottom label. 10/100/1000 192.168.1.1 255.255.255.0 0.0.0.0 Disabled Default Settings and Technical Specifications A-1 v1.1, November 2009