Netgear WNDAP350 WNDAP350 User Manual - Page 64
Restricting Wireless Access by MAC Address, admin, password, Configuration, Security, Advanced
UPC - 606449064643
View all Netgear WNDAP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual Restricting Wireless Access by MAC Address The optional Access Control window lets you block the network access privilege of any specified stations through the WNDAP350 wirelss access point. When you enable access control, the access point only accepts connections from clients on the selected access control list. This provides an additional layer of security. Note: If configuring the WNDAP350 from a wireless computer whose MAC address is not in the access control list, if you select Turn Access Control On, you will lose your wireless connection when you click Apply. You must then access the wireless access point from a wired computer or from a wireless computer that is on the access control list to make any further changes. To restrict access based on MAC addresses: 1. Log in to the WNDAP350 using the default address of http://192.168.0.237, user name of admin and default password of password, or whatever LAN address and password you have set up. 2. Under the Configuration tab, select Security on the main menu, select Advanced from the left panel, and then select MAC Authentication. The MAC Authentication screen displays. 2-44 Basic Installation and Configuration v1.1, November 2009