Netgear WNDAP350 WNDAP350 User Manual - Page 79
Monitoring, System, Table 3-1, Appendix B, Related, Documents
UPC - 606449064643
View all Netgear WNDAP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual Under the Monitoring tab on the main menu, select System to view the System screen, shown in Figure 3-11 below. This screen shows the parameters listed in Table 3-1: Table 3-1. System Information Fields Field Description Access Point Information Access Point Name Indicates the NetBIOS name. The default name may be changed, if desired. Ethernet MAC Address Displays the Media Access Control address (MAC address) of the wireless access point's Ethernet port. Wireless MAC address for Displays the Media Access Control address (MAC address) of the wireless 2.4GHz access point's wireless card when operating at 2.4GHz Wireless MAC address for Displays the Media Access Control address (MAC address) of the wireless 5GHz access point's wireless card when operating at 5GHz Country/Region Displays the domain or region for which the wireless access point is licensed for use. It may not be legal to operate this wireless access point in a region other than one of those identified in this field. Firmware Version The version of the firmware currently installed. Current Time Displays the current system time of the access point. Current IP Settings IP Address Subnet Mask Default Gateway DHCP Client The IP address of the wireless access point. The subnet mask for IP address of the wireless access point. The default gateway for the wireless access point communication. Enabled indicates that the current IP address of the AP was obtained from a DHCP server on your network. Disabled indicated a static IP configuration. Current Wireless Settings for 802.11b/bg/ng Operating Mode Identifies the 802.11 operating mode of the WNDAP350. Channel/Frequency Rogue AP Detection Identifies the channel the wireless port is using. 'Auto' is the default channel setting. (Channel frequencies used on each channel can be found in "Wire- less Communications"; a link to this article is in Appendix B, "Related Documents.). Identifies whether the Rogue AP detection feature is enabled or disabled. Current Wireless Settings for 802.11n/na Operating Mode Identifies the 802.11 operating mode of the WNDAP350. Management v1.1, November 2009 3-13