Netgear WNDAP350 WNDAP350 User Manual - Page 63
Network Authentication, WPA-PSK & WPA2-PSK, Data Encryption, TKIP+AES
UPC - 606449064643
View all Netgear WNDAP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual . Figure 2-23 Configure WPA-PSK and WPA2-PSK To configure WPA-PSK and WPA2-PSK: 1. From the Network Authentication drop-down menu, select WPA-PSK & WPA2-PSK. By default, Data Encryption will be set to TKIP+AES. 2. Enter the WPA Passphrase (Network Key). 3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations. 4. Click Apply to save your settings. Basic Installation and Configuration v1.1, November 2009 2-43
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Basic Installation and Configuration
2-43
v1.1, November 2009
.
To configure WPA-PSK and WPA2-PSK:
1.
From the
Network Authentication
drop-down menu, select
WPA-PSK & WPA2-PSK
. By
default,
Data Encryption
will be set to
TKIP+AES
.
2.
Enter the WPA Passphrase (Network Key).
3.
Wireless Client Security Separation
is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
4.
Click
Apply
to save your settings.
Figure 2-23
Configure WPA-PSK and WPA2-PSK