Netgear WNDAP350 WNDAP350 User Manual - Page 49

Configuring the RADIUS Server Settings, WPA-PSK Preshared Key, WPA RADIUS Settings., admin, password

Get Netgear WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point PDF manuals and user guides
UPC - 606449064643
View all Netgear WNDAP350 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual • WPA-PSK (Preshared Key) Record the WPA-PSK key. Key • WPA RADIUS Settings. For WPA, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary Secondary Port Shared Secret Use the procedures described in the following sections to configure the WNDAP350. Store this information in a safe place. Configuring the RADIUS Server Settings You can setup or modify the RADIUS Server settings to compliment Network Authentication security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server settings must be configured before completing the Network Authentication security profile (see "Configuring WPA with RADIUS" on page 2-35, "Configuring WPA2 with RADIUS" on page 2-37, or "Configuring WPA and WPA2 with RADIUS" on page 2-38 for specifics on implementing these security options). Note: The RADIUS Server Settings apply to all profiles. They only need to be configured once per wireless access point. To set up or modify the RADIUS Server Settings: 1. From your Web browser, log in to the WNDAP350 using the default LAN address of http://192.168.0.237, user name admin and password password, or use the LAN address and password that you set up. 2. Under the Configuration tab, select Security on the main menu, select Advanced from the left panel, and then select RADIUS Server Settings. The RADIUS Server Settings screen displays, as shown in Figure 2-14. Basic Installation and Configuration v1.1, November 2009 2-29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Basic Installation and Configuration
2-29
v1.1, November 2009
•
WPA-PSK (Preshared Key)
Record the WPA-PSK key. Key: ___________________________________
•
WPA RADIUS Settings.
For WPA, record the following settings for the primary and
secondary RADIUS servers:
Server Name/IP Address: Primary _________________
Secondary __________________
Port: ___________________________________
Shared Secret: ___________________________________
Use the procedures described in the following sections to configure the WNDAP350. Store this
information in a safe place.
Configuring the RADIUS Server Settings
You can setup or modify the RADIUS Server settings to compliment Network Authentication
security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with
WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server
settings must be configured before completing the Network Authentication security profile (see
“Configuring WPA with RADIUS” on page 2-35
,
“Configuring WPA2 with RADIUS” on
page 2-37
, or
“Configuring WPA and WPA2 with RADIUS” on page 2-38
for specifics on
implementing these security options).
To set up or modify the RADIUS Server Settings:
1.
From your Web browser, log in to the WNDAP350 using the default LAN address of
, user name
admin
and password
password
, or use the LAN address and
password that you set up.
2.
Under the
Configuration
tab, select
Security
on the main menu, select
Advanced
from the
left panel, and then select
RADIUS Server Settings
. The RADIUS Server Settings screen
displays, as shown in
Figure 2-14
.
Note:
The RADIUS Server Settings apply to all profiles. They only need to be configured
once per wireless access point.