Netgear WNDAP350 WNDAP350 User Manual - Page 52
admin, password, Configuration, Edit., Network Authentication
UPC - 606449064643
View all Netgear WNDAP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual To configure a Security Profile: 1. From your Web browser, log in to the WNDAP350 using the default LAN address of http://192.168.0.237, user name admin and password password, or use the LAN address and password that you set up. 2. Under the Configuration tab, select Security from the main menu, and then select either Security Profile Settings for 802.11b/bg/ng or 802.11a/na. The screen for the Profile Settings you selected displays as shown in Figure 2-15above. 3. Select the check box of the profile you want to modify and click Edit. The Security Profile Configuration screen for the selected profile displays (see Figure 2-16). Figure 2-16 Edit a security profile 4. Give your profile a meaningful name so that you can remember it later. 5. The Wireless Network Name (SSID) is set by default to identify it as NETGEAR_11g. 6. Enable or disable the Broadcast Wireless Network Name (SSID). It is enabled by default. (If it is broadcast, it can be easily detected by other clients.) 7. From the Network Authentication pull-down menu, select the Network Authentication Type you want to use for this profile: • To configure WEP encryption for Open Systems or Shared Key, see "Configuring WEP" on page 2-33. 2-32 Basic Installation and Configuration v1.1, November 2009