Netgear WNDAP350 WNDAP350 User Manual - Page 99
Wireless Point to Point Bridge, Wireless Client Association
UPC - 606449064643
View all Netgear WNDAP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual When you click the Edit button, you must enter the profile name and the MAC address (physical address) of the other bridge mode wireless station in the fields provided. WEP, WPA-PSK, or WPA2-PSK are supported. WPA2-PSK can (and should) be used to protect this communication. The screens used to configure these options are located by selecting Wireless Bridge under the Configuration tab (see Figure 4-6 below). Figure 4-6 Enable Wireless Point-to-Point Bridge To configure bridge settings on the Bridging page shown in Figure 4-6 above, follow these steps: 1. Select the Enable Wireless Bridging option. 2. Select one of the bridge mode options, Wireless Point to Point Bridge, or Wireless Point to Multi-Point Bridge. 3. Select Enable Wireless Client Association, if you wish. 4. Click Edit to edit the security profile of the wireless bridge settings, as shown in Figure 4-7 below. Advanced Configuration v1.1, November 2009 4-11