Nikon 25446B D90 User's Manual - Page 208
Commander Mode, Adjust settings for the built-in flash.
UPC - 689466140132
View all Nikon 25446B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
❚❚ Commander Mode Use the built-in flash as a master flash controlling one or more remote optional SB-900, SB-800, SB-600, or SB-R200 flash units in up to two groups (A and B) using advanced wireless lighting. Selecting this option displays the menu shown at right. Press 4 or 2 to highlight the following options, 1 or 3 to change. Option Description Built-in flash Choose a flash mode for the built-in flash (commander flash). TTL i-TTL mode. Choose flash compensation from values between +3.0 and -3.0 EV in increments of 1/3 EV. M Choose the flash level from values between Full and 1/128 (1/128 of full power). -- The built-in flash does not fire, but the AF-assist illuminator lights. The built-in flash must be raised so that it can emit monitor pre-flashes. Group A Choose a flash mode for all flash units in group A. TTL i-TTL mode. Choose flash compensation from values between +3.0 and -3.0 EV in increments of 1/3 EV. AA Auto aperture (available only with SB-900 and SB-800 flash units). Choose flash compensation from values between +3.0 and -3.0 EV in increments of 1/3 EV. M Choose the flash level from values between Full and 1/128 (1/128 of full power). - - The flash units in this group do not fire. Group B Choose a flash mode for all flash units in group B. same as those listed for Group A, above. The options available are the L Channel Choose from channels 1-4. channel. All flash units in both groups must be set to the same Follow the steps below to take photographs in commander mode. 1 Adjust settings for the built-in flash. Choose the flash control mode and output level for the built-in flash. Note that output level can not be adjusted in - - mode. 188