Nokia IP1260 Installation Guide - Page 102

sysinfo, 16MB 31360 sectors, 31 cyls, 16 heads, 63 S/T, 512 B/S

Page 102 highlights

6 Using the Boot Manager sysinfo Use the sysinfo command to view system information such as CPU speed and memory size. This command has the following syntax: sysinfo For example: BOOTMGR[6]> sysinfo CPU 0: 1996 MHz Pentium 4/XEON Memory: 536870912 (512M bytes) Disk Devices: IO port 0x1f0 wdc0: unit 0 (wd0): 16MB (31360 sectors), 31 cyls, 16 heads, 63 S/T, 512 B/S IO port 0x1f0 wdc0: unit 1 (wd1): 20003MB (9767520 sectors), 608 cyls, 255 heads, 63 S/T, 512 B/S Network Interfaces: eth-s3p1: flags=131 ether 0:30:30:0:20:10 speed 10M full duplex eth-s3p2: flags=130 ether 0:30:30:0:20:11 speed 10M full duplex eth-s3p3: flags=130 ether 0:30:30:0:20:12 speed 10M full duplex eth-s3p4: flags=130 ether 0:30:30:0:20:13 speed 10M full duplex loop0: flags=10b soverf0: flags=2923 stof0: flags=2903 tun0: flags=107 102 Nokia IP1200 Series Security Platform Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156

6
Using the Boot Manager
102
Nokia IP1200 Series Security Platform Installation Guide
sysinfo
Use the sysinfo command to view system information such as CPU speed and
memory size. This command has the following syntax:
sysinfo
For example:
BOOTMGR[6]>
sysinfo
CPU 0: 1996 MHz Pentium 4/XEON
Memory: 536870912 (512M bytes)
Disk Devices:
IO port 0x1f0 wdc0: unit 0 (wd0): <SanDisk SDCFB-16>
16MB (31360 sectors), 31 cyls, 16 heads, 63 S/T, 512 B/S
IO port 0x1f0 wdc0: unit 1 (wd1): <IBM-DJSA-205>
20003MB (9767520 sectors), 608 cyls, 255 heads, 63 S/T,
512 B/S
Network Interfaces:
eth-s3p1:
flags=131<LINK,BROADCAST,MULTICAST,PRESENT>
ether 0:30:30:0:20:10 speed 10M full duplex
eth-s3p2:
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:30:30:0:20:11 speed 10M full duplex
eth-s3p3:
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:30:30:0:20:12 speed 10M full duplex
eth-s3p4:
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:30:30:0:20:13 speed 10M full duplex
loop0:
flags=10b<UP,LINK,LOOPBACK,PRESENT>
soverf0:
flags=2923<UP,LINK,MULTICAST,PRESENT,IPV6ONLY>
stof0:
flags=2903<UP,LINK,PRESENT,IPV6ONLY>
tun0:
flags=107<UP,LINK,POINTOPOINT,PRESENT>