Nokia IP1260 Installation Guide - Page 66
Remove the two bezel retaining screws with a Phillips screwdriver., Locate the bezel retaining screws
View all Nokia IP1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4 Installing and Replacing Network Interface Cards 7. Locate the bezel retaining screws, used to keep the NIC attached, on the underside of the PMC carrier. 8. Remove the two bezel retaining screws with a Phillips screwdriver. 00311 Note If you are installing a NIC in an unoccupied slot on the PMC carrier, remove the blank bezel that covers the slot and retain it for future use. Proceed to step 11. 66 Nokia IP1200 Series Security Platform Installation Guide
4
Installing and Replacing Network Interface Cards
66
Nokia IP1200 Series Security Platform Installation Guide
7.
Locate the bezel retaining screws, used to keep the NIC attached, on the
underside of the PMC carrier.
8.
Remove the two bezel retaining screws with a Phillips screwdriver.
Note
If you are installing a NIC in an unoccupied slot on the PMC carrier,
remove the blank bezel that covers the slot and retain it for future use.
Proceed to
step 11
.
00311