Nokia IP1260 Installation Guide - Page 89
V.35 and X.21 NIC Connectors and Cables, Single-Port V.35 or X.21 NIC Front Panel Details
View all Nokia IP1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Single-Port V.35 or X.21 NIC Figure 22 Single-Port V.35 or X.21 NIC Front Panel Details Link LED (green) 00260 Amp 50-pin CHAMP connector In most cases, you connect the NIC to a channel service unit/data service unit (CSU/DSU). If you are connecting the NIC to a CSU/DSU, and the CSU/ DSU can provide a clock, select external clock (the default value) in the physical configuration section in the Network Voyager configuration program. For the clock configuration to function, the CSU/DSU or other DCE device must supply the clock. On a Cisco network application, you can connect the NIC directly to a frame relay switch or to a platform serial port. You can also connect the NIC directly to any device that has a DCE serial port. Note Use the V.35 or X.21 NIC only as a DTE device. V.35 and X.21 NIC Connectors and Cables The connector on the NIC is an Amp 50-pin CHAMP female connector. The cable shipped with the NIC has a 50-pin male connector on one end and the appropriate V.35 or X.21 connector on the other end. Nokia IP1200 Series Security Platform Installation Guide 89