Nokia IP1260 Installation Guide - Page 45
release you are running., initial configuration process, see the release notes for the Nokia software
View all Nokia IP1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Performing the Initial Configuration on your network is configured to respond to any request). To reset the incorrect host name and IP address: a. Establish a console connection to the system. b. Enter the following: rm /config/active or mv /config/active /config/active.old c. Reboot the appliance. d. Respond to the Hostname? prompt within 30 seconds to prevent the DHCP client from restarting. 3. At each subsequent prompt, enter the requested configuration information. For more information about how to respond to the prompts during the initial configuration process, see the release notes for the Nokia software release you are running. 4. When you are prompted to select an interface, Nokia recommends that you select one of the Ethernet management interface ports. To select an interface, enter the number adjacent to the physical ID in the list of connected interfaces. Nokia IP1200 Series Security Platform Installation Guide 45