Nokia IP1260 Installation Guide - Page 93
Connectors and Cables, Single-Port T1 NIC Front Panel Details, Warning, Caution
View all Nokia IP1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Figure 25 Single-Port T1 NIC Front Panel Details Single-Port T1 NIC 00201 LOS (red LED) REMOTE (yellow LED) SYNC (green LED) LOOP (yellow LED) Connectors and Cables To connect the card to a T1 device, use a straight-through RJ-48 cable. To connect the card to another channel service unit/data service unit (CSU/ DSU), use an RJ-48 crossover cable wired as shown in Figure 26 on page 94. You can order appropriate adapter cables separately from Nokia (see "Nokia Contact Information" on page 3). Warning Cables connecting to the T1 card must be a minimum of 26 AWG wire. Caution Remove the T1 cable before you work on any Nokia appliance. Caution Nokia requires that this equipment be installed by authorized, experienced service personnel who have the equipment installation instructions. Nokia requires that all equipment be connected to a Nokia IP1200 Series Security Platform Installation Guide 93