Nokia IP1260 Installation Guide - Page 130
To add or replace DIMMs, To upgrade or replace your Nokia IP1200 Series Security Platform memory
View all Nokia IP1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
8 Installing and Replacing Other Components Before You Begin To upgrade or replace your Nokia IP1200 Series Security Platform memory, you need: Physical access to the appliance Nokia memory upgrade kit and accompanying documentation Access to the appliance by using Nokia Network Voyager or Lynx Caution To protect the IP1200 Series and the memory modules from electrostatic discharge damage, make sure you are properly grounded before you touch these components. Use a grounding wrist strap and follow the instructions provided with the wrist strap before you handle the components or open the appliance. If you do not have a grounding wrist strap, make sure you are properly grounded before you touch any electronic component. Note Because power to an IP1200 Series is automatically disconnected when the chassis assembly is opened, you do not need to manually disconnect the power for this procedure. Any servicing of the appliance, however, should be completed with the chassis assembly fully removed from the appliance. To add or replace DIMMs 1. Use Nokia Network Voyager or Lynx to perform an orderly shutdown of the IP1200 Series. For information about how to access Network Voyager and the related reference materials, see "To open Nokia Network Voyager" on page 47. 130 Nokia IP1200 Series Security Platform Installation Guide