Nokia IP1260 Installation Guide - Page 77
Ethernet NIC Connectors and Cables, Use IEEE 802.3 10BASE-T, 100BASE-TX category-5 unshielded twisted
View all Nokia IP1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Four-Port and Dual-Port 10/100 Ethernet NICs Ethernet NIC Connectors and Cables The Ethernet connectors on the dual-port and four-port 10/100 Ethernet NICs are RJ-45 connectors. Use a straight-through or crossover cable to connect the NIC to a 10-Mbps or 100-Mbps hub or switch or to connect directly to a host. An auto-detect crossover cable feature on this NIC automatically detects the correct cable type. Use IEEE 802.3 10BASE-T, 100BASE-TX category-5 unshielded twistedpair, full-duplex, or half-duplex cable. You can order appropriate adapter cables separately from a cable vendor of your choice. Figure 14 shows the pin assignments for the RJ-45 cable. The RJ-45 cable output connector is numbered from right to left, with the copper tabs facing up and toward you. Figure 14 Output Connector for the Ethernet Cable 8 1 Pin 1 2 00270 3 4 5 6 7 8 Assignment TX + TX RX + RX - Nokia IP1200 Series Security Platform Installation Guide 77