Nokia IP1260 Installation Guide - Page 81
Copper Gigabit Ethernet NIC Features, PCI operation at 33 MHz, 66 MHz, and 100 Mhz
View all Nokia IP1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Performance Considerations maximum system throughput. Each 6U PMC card carrier unit has a separate PCI bus connection to the main system motherboard. In the configuration described here, each of the two copper dual-port Gigabit Ethernet NICs access a separate PCI bus. For the IP1200 Series appliance, any two NICs installed on a single PMC carrier both operate at the PCI frequency of the least capable NIC installed. Copper Gigabit Ethernet NIC Features The copper Gigabit Ethernet NIC supports: High bandwidth Full-duplex mode operation up to 1 Gbps Link speed auto advertising (10/100/1000) Hot swapping PCI operation at 33 MHz, 66 MHz, and 100 Mhz Compliance with IEEE 802.3z and 802.3ab Gigabit Ethernet specifications Cable autosensing You can configure and monitor Gigabit Ethernet NIC interfaces with Nokia Network Voyager. Specifically, you can use Network Voyager to set the port speed and full-duplex mode to 1000, 100, or 10 Mbps. For information about how to access Network Voyager and the related reference materials, see "Accessing Nokia Network Voyager Reference Information" on page 48. Nokia IP1200 Series Security Platform Installation Guide 81