Nokia IP1260 Installation Guide - Page 68
Insert a blank bezel onto the front of the empty slot formerly occupied, on the chassis assembly.
View all Nokia IP1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
4 Installing and Replacing Network Interface Cards 11. Insert the new NIC or a blank bezel by doing one of the following: a. Insert the NIC front bezel into the PMC carrier and gently push the back of the NIC down toward the chassis assembly. Make sure that the NIC edge is completely seated into the connectors on the chassis assembly. 00314 b. Insert a blank bezel onto the front of the empty slot formerly occupied by the NIC and push it gently into place. Make sure that the bezel is completely seated onto the slot on the front of the PMC carrier and that the screw holes on the bottom of the bezel align with those on the bottom of the PMC carrier. Proceed to step 13. Note The blank bezel is required for the IP1200 Series to meet emissions requirements during operation. 68 Nokia IP1200 Series Security Platform Installation Guide