Nokia IP1260 Installation Guide - Page 70

Configuring and Activating Interfaces

Page 70 highlights

4 Installing and Replacing Network Interface Cards 15. Press both levers to make sure that they are locked into place and power is restored to the card carrier. The power indicator LED on the PMC carrier illuminates green. . 00315.1 If you are replacing a NIC with a new NIC of the same type, the Nokia IPSO operating system automatically recognizes the NIC and applies the original configuration to the new NIC. If you are installing a new or different NIC, configure the new NIC by using Nokia Network Voyager. For information about how to access Network Voyager, see "To open Nokia Network Voyager" on page 47. Configuring and Activating Interfaces The Nokia IP1200 Series Security Platform automatically detects any new NICs when the PMC carrier is completely installed. Use Nokia Network Voyager to configure and activate the logical and physical interfaces on the card. 70 Nokia IP1200 Series Security Platform Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156

4
Installing and Replacing Network Interface Cards
70
Nokia IP1200 Series Security Platform Installation Guide
15.
Press both levers to make sure that they are locked into place and power is
restored to the card carrier.
The power indicator LED on the PMC carrier illuminates green.
.
If you are replacing a NIC with a new NIC of the same type, the Nokia
IPSO operating system automatically recognizes the NIC and applies the
original configuration to the new NIC.
If you are installing a new or different NIC, configure the new NIC by
using Nokia Network Voyager. For information about how to access
Network Voyager, see
“To open Nokia Network Voyager”
on page 47.
Configuring and Activating Interfaces
The Nokia IP1200 Series Security Platform automatically detects any new
NICs when the PMC carrier is completely installed. Use Nokia Network
Voyager to configure and activate the logical and physical interfaces on the
card.
00315.1