Nokia IP1260 Installation Guide - Page 132

gradually free it from the contact pins.

Get Nokia IP1260 - Security Appliance PDF manuals and user guides View all Nokia IP1260 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 132 highlights

8 Installing and Replacing Other Components 5. Remove the DIMM by pressing the two retaining clips outward and carefully pulling each DIMM upward. 00322 You might need to pull opposite ends of the DIMM alternately to gradually free it from the contact pins. 6. Press the new DIMM into the socket until it clicks into place. Note You must install DIMMs in pairs starting from the left. Insert a pair of DIMMS into adjacent slots J5/J6 and/or J7/J8, otherwise the DIMMS will not work. You can also use all four slots at one time. The top of the DIMM is smooth. The bottom edge has two differentlength sets of contacts, which mate with the slots on the socket. Be sure the contacts and slots are properly aligned before you insert the DIMM. 132 Nokia IP1200 Series Security Platform Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
8
Installing and Replacing Other Components
132
Nokia IP1200 Series Security Platform Installation Guide
5.
Remove the DIMM by pressing the two retaining clips outward and
carefully pulling each DIMM upward.
You might need to pull opposite ends of the DIMM alternately to
gradually free it from the contact pins.
6.
Press the new DIMM into the socket until it clicks into place.
Note
You must install DIMMs in pairs starting from the left. Insert a pair of
DIMMS into adjacent slots J5/J6 and/or J7/J8, otherwise the DIMMS
will not work. You can also use all four slots at one time.
The top of the DIMM is smooth. The bottom edge has two different-
length sets of contacts, which mate with the slots on the socket. Be sure
the contacts and slots are properly aligned before you insert the DIMM.
00322