Nokia IP1260 Installation Guide - Page 140
Installing a Fan Unit, Before You Begin
View all Nokia IP1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
8 Installing and Replacing Other Components Installing a Fan Unit The fan unit is hot swappable. You can remove and install the fan unit on the back of the IP1200 Series without shutting the appliance down. Before You Begin To replace a fan unit, you need: Physical access to the IP1200 Series. Replacement fan unit kit and appropriate documentation. Caution Components inside the appliance can overheat if they are not cooled even for a short period of time. If you are replacing a failed fan unit, and do not completely remove power to the appliance, do not allow the appliance to run without a fan unit for any longer than necessary. To replace a fan unit 1. Locate the fan unit on the back of the IP1200 Series and the four retaining screws that secure it. Fan unit 00308a 2. Loosen the retaining screws by turning them counterclockwise. 140 Nokia IP1200 Series Security Platform Installation Guide