Onkyo HT-S6300 manual table of contents:
- Onkyo HT-S6300 | Owner Manual - Page 1
7.1ch Home Theater System
AV Receiver (HT-R680) Speaker Package (HTP-780) Universal ...Other Components...56
Thank you for purchasing an Onkyo 7.1ch Home Theater System. Please read this manual thoroughly before making ...
- Onkyo HT-S6300 | Owner Manual - Page 2
... alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Important Safety Instructions
... apparatus exhibits a distinct change in performance this indicates a need for service. 16. Object and Liquid Entry Never push ...
- Onkyo HT-S6300 | Owner Manual - Page 3
... the unit is not user-serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care-Occasionally you should dust the unit all ...or any other liquid gets inside this unit, have it checked by your Onkyo dealer. Handling Notes • If you need to transport this...
- Onkyo HT-S6300 | Owner Manual - Page 4
... the same regardless of color.
AV Receiver HT-R680
HT-R680 (➔ 8) Remote controller and two batteries (AA/...) AM loop antenna (➔ 22) Speaker setup microphone (➔ 28)
Speaker Package HTP-680
UP-A1 (➔ 56)
AV Receiver HT-R680
HT-R680 (➔ 8) Remote controller ...
- Onkyo HT-S6300 | Owner Manual - Page 5
...Speaker Precautions ...4 Package Contents ...4 Features ...6 Front & Rear Panels ...8 Speaker Package ...10 Remote Controller ...12 About Home Theater ...13
Connecting the AV Receiver ...14
Turning On & Basic Operations
Turning On/Off the ...
- Onkyo HT-S6300 | Owner Manual - Page 6
AV Receiver HT-R680
• 130 Watts/Channel @ 6 ohms • WRAT-Wide Range ... Circuit Technology • 4 HDMI*4 Inputs and 1 Output • Onkyo for System Control • 4 Digital Inputs (2 Optical/2 Coaxial... iBiquity Digital Corporation. To receive HD Radio broadcasts, you must install an Onkyo UP-HT1...
- Onkyo HT-S6300 | Owner Manual - Page 7
... Level Control • Max. power: 290 W (Dynamic power)
Universal Port Option Dock for iPod® (UP-A1)
• Easily links iPod/iPhone models with Onkyo A/V Systems.
Speaker Package HTP-780
SKF-780 L/R 2-Way Front Speakers • 3-1/4" (8 cm) ...
- Onkyo HT-S6300 | Owner Manual - Page 8
... (➔ 26) MEMORY button (➔ 31) TUNING MODE button (➔ 30) DISPLAY button (➔ 25) SETUP button (➔ 38) TUNING, PRESET (➔ 30 to 31), arrow and ENTER buttons RETURN button ... AUX INPUT LINE IN jack (➔ 20) AUX INPUT VIDEO jack (➔ 20) AUX INPUT AUDIO jacks (➔ 20) SETUP MIC jack (➔ 28)
- Onkyo HT-S6300 | Owner Manual - Page 9
...ANTENNA jack and AM ANTENNA terminal MONITOR OUT V jack UNIVERSAL PORT jack SPEAKERS terminals (CENTER, FRONT, SURR and SURR BACK OR FRONT HIGH) ... 2 LINE OUT jacks SUBWOOFER PRE OUT jack FRONT HIGH OR ZONE 2 SPEAKERS terminals See "Connecting the AV Receiver" for connection information (➔ 16 to...
- Onkyo HT-S6300 | Owner Manual - Page 10
...should be connected to the SUBWOOFER PRE OUT on the AV receiver with supplied RCA cable.
Note • The Auto ...increasing or decreasing the subwoofer output level on the AV receiver (➔ 42).
With the Auto Standby function, the SKW-..., Center, Surround and Surround Back Speakers
■ HTP-680 (SKF-680, SKC...
- Onkyo HT-S6300 | Owner Manual - Page 11
...-mount the speaker. See "Wall Mounting" for mounting instructions (➔ 14). Speaker terminals These push terminals are for connecting the speaker to the HT-R680 with the supplied speaker cables. The supplied speaker cables are color-coded for ...
- Onkyo HT-S6300 | Owner Manual - Page 12
... AV receiver, press RECEIVER to select Receiver mode. You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player and ... the tuner To control the AV receiver's tuner, press TUNER (or RECEIVER). You can select AM or FM by pressing TUNER repeatedly...
- Onkyo HT-S6300 | Owner Manual - Page 13
About Home Theater
Enjoying Home Theater
Thanks to the AV receiver's superb capabilities, you can enjoy surround sound with a...DSP listening modes.
Front speakers (SKF-680/780) These output the overall sound. Their role in a home theater is to provide a solid anchor for the sound image. They should ...
- Onkyo HT-S6300 | Owner Manual - Page 14
Connecting the AV Receiver
Attaching the Speaker Bases
■ SKF-780 Before you connect ... slots.
Front, Surround and Surround Back Speakers
To mount the front, surround and surround back ...-780
Keyhole slot for wall mounting
To mount the center speaker horizontally, use the ...
- Onkyo HT-S6300 | Owner Manual - Page 15
7-7/8" (200 mm) Caution
• A mounting screw's ability to support a speaker depends on how well it's anchored to the wall. If you have hollow ...the screw head, as shown. (We recommend that you consult a home installation professional.)
1-3/16" (30 mm) Bottom...
- Onkyo HT-S6300 | Owner Manual - Page 16
... you should use depending on the number of speakers that you have. For 7.1-channel surround-sound playback, ... damage the AV receiver.
2 3 4 5 6 7 7 8 9
If you're using only one surround back speaker, .... Doing so may damage the AV receiver. • Don't connect one speaker to several terminals.
- Onkyo HT-S6300 | Owner Manual - Page 17
...-type speaker terminals Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown. ... to the SURR BACK OR FRONT HIGH SPEAKERS terminals. When doing so, set "Surr Back/Front High" in Speaker Setup to "Front High" (➔ 40).
- Onkyo HT-S6300 | Owner Manual - Page 18
: Video & Audio
: Video : Audio
TV, projector, etc.
Blu-ray Disc/ DVD player
...88.2/96 kHz. Even 176.4/192 kHz is effective in case of the HDMI connection. Note
• The AV receiver does not support SCART plugs. • The AV receiver's optical digital jacks...
- Onkyo HT-S6300 | Owner Manual - Page 19
...is set to "On"(➔ 49).
Tip • To listen to audio received by the HDMI IN jacks through your TV's speakers: - Set the "TV Control" setting to ... of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to another input source, this may...
- Onkyo HT-S6300 | Owner Manual - Page 20
... OUT, use the AV receiver's display when changing settings.
Connect your components to... LINE IN jack will be given a higher priority. The AV receiver can output audio and video signals...you cannot record the video through the AV receiver. To make a connection for video recording (➔ 32)....
- Onkyo HT-S6300 | Owner Manual - Page 21
...one to the AV receiver. The other jack is for connecting additional -capable components. • Connect only Onkyo ... supplied with your other Onkyo components. • While Zone 2 is on, the System On/Auto Power On and .../CD
Step 1: Make sure that each Onkyo component is connected with an analog audio cable...
- Onkyo HT-S6300 | Owner Manual - Page 22
... FM antenna and AM loop antenna. The AV receiver won't pick up any radio signals ... FM antenna (supplied) Note • Once your AV receiver is ready for use, you'll need to ... reception. • Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords. Tip...
- Onkyo HT-S6300 | Owner Manual - Page 23
Which Connections Should I Use?
The AV receiver supports several connection formats for compatibility with... latter offering the best picture quality. Video input signals flow through the AV receiver as... etc.
Analog Optical Coaxial HDMI
HDMI *1 *2
- Onkyo HT-S6300 | Owner Manual - Page 24
Press ON/STANDBY on the front panel. or Press RECEIVER followed by ON/STANDBY on the remote controller. The AV ... on the front panel or the remote controller. The AV receiver will enter Standby mode. To prevent any loud surprises when you turn on the AV receiver, always turn down the volume before...
- Onkyo HT-S6300 | Owner Manual - Page 25
... AV receiver's DISPLAY.
Playing the Connected Component
■ Operating on the AV receiver
Use the input selector buttons to select the input source. ... 4
Input & output resolution
■ Operating with the remote controller
Press RECEIVER followed by INPUT SELECTOR. Start playback on the ...
- Onkyo HT-S6300 | Owner Manual - Page 26
You can prioritize which speakers you want to use. Press RECEIVER followed by SP LAYOUT ...the listening mode that doesn't support front high or surround back speakers is used, the setting cannot be ...Sleep Timer
With the sleep timer, you can set the AV receiver to turn off automatically after a...
- Onkyo HT-S6300 | Owner Manual - Page 27
...Changing the Input Display
When you connect an -capable Onkyo component, you must configure the input ...component name may be displayed if the AV receiver receives it via HDMI connection (➔ 19)....Zone 2 speakers are not turned off.) • When you connect a pair of headphones, the listening mode is set ...
- Onkyo HT-S6300 | Owner Manual - Page 28
..., radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices.... the input to which the AV receiver is connected. Set the speaker setup microphone at the Main Listening... 2EQ to create a listening environment in your home theater that all listeners will enjoy, Audyssey...
- Onkyo HT-S6300 | Owner Manual - Page 29
... an option, and then press ENTER.
2EQ: Auto Setup - - Review Speaker Configuration - Subwoofer Front Center Surround Front High Surr...if saving fails. Try saving again. If this message appears after 2 or 3 attempts, contact your Onkyo dealer. • Speaker Detect Error This message appears if a speaker ...
- Onkyo HT-S6300 | Owner Manual - Page 30
... buttons on the front panel unless otherwise specified. ■ Manual tuning mode
Press TUNING MODE so... selection. This model changes FM/AM frequency in 200/10kHz (or 50/9kHz) steps.
In manual ... impossible to get good reception. In this case, switch to manual tuning mode and listen to the station ...
- Onkyo HT-S6300 | Owner Manual - Page 31
... 1 through 40. Press MEMORY again to store the station or channel. The station or channel is stored and the preset number stops flashing. Repeat ... and frequency.
To select a preset, use PRESET / on the AV receiver, or the remote controller's CH +/-.
Tip • You can also use the...
- Onkyo HT-S6300 | Owner Manual - Page 32
... recorder Note
Cassette, CDR, MD, etc.
• The AV receiver must be turned on for recording. Recording is not possible ... the recording VCR without going through the AV receiver, connect the TV/VCR's audio and video ... VCR's audio and video inputs. See the manuals supplied with your TV and VCR for ...
- Onkyo HT-S6300 | Owner Manual - Page 33
... modes (➔ 34).
Listening Mode Buttons
Press RECEIVER first.
MOVIE/TV, MUSIC, GAME
MUSIC ...Blu-ray Disc/DVD player is connected to the AV receiver with a digital audio connection (coaxial, optical, or... sound through your TV speakers coming from components connected to the AV receiver (“TV Sp Onମ.
- Onkyo HT-S6300 | Owner Manual - Page 34
...) sound. Two independent audio signal channels are reproduced through two speakers. This is 5.1-channel surround sound. This surround system has five main channels of ... 41).
Press RECEIVER followed by SP LAYOUT repeatedly to select front high or surround back speakers.
- Onkyo HT-S6300 | Owner Manual - Page 35
...processing. The "Sp Config" (presence of speakers), "Sp Distance" and D i r e c t d i o P P "A/V Sync" settings are enabled, but ... not using any surround back speakers, Dolby Pro Logic II will be used... use existing program material when height channel speaker outputs are present. Dolby Pro...
- Onkyo HT-S6300 | Owner Manual - Page 36
... "Sp Config" (presence of speakers), "Crossover", "Sp DisD o l b y c D i o P P tance", "A/V Sync" and much of the processing set via AUDIO ... to 7.1-channel playback. It uses seven full-bandwidth channels of matrix decoding for matrix-encoded N e o : 6 t r i x t e material, providing a...
- Onkyo HT-S6300 | Owner Manual - Page 37
Onkyo-Original DSP Listening Modes
Listening Mode Orchestra Description Suitable for classical or operatic music, this mode .... *5 For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system. *6 AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the ...
- Onkyo HT-S6300 | Owner Manual - Page 38
ENTER / / / SETUP RETURN
MENU 1. 2. 3. 4. 5. 6. 7. 8. 9. Input/Output Assign Speaker ... RECEIVER followed by SETUP. The following menu appears.
MENU 1. Input/Output Assign 2. Speaker.../Mono Dolby DTS Theater-Dimensional
Remote Controller Setup (➔ 60)
8. Remote Controller...
- Onkyo HT-S6300 | Owner Manual - Page 39
... and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your ...Select this to have the AV receiver automatically convert video at resolutions not supported by your TV....ve connected your TV to the AV receiver with an HDMI cable, composite video and ...
- Onkyo HT-S6300 | Owner Manual - Page 40
Main menu Speaker Setup
Some of the settings in this section are set automatically by Audyssey 2EQ® Room Correction ... by Audyssey 2EQ Room Correction and Speaker Setup function, or set them manually, which is useful if you change one of the connected speakers after using ...
- Onkyo HT-S6300 | Owner Manual - Page 41
...to "None" (➔ 48), this setting cannot be selected.
■ LPF of LFE (Low-Pass Filter for the LFE Channel) 80Hz, 90Hz, 100Hz, 120Hz With this setting, you can specify ... only applies to sources that use the LFE channel. ■ Double Bass This setting is NOT set automatically by Audyssey 2EQ ...
- Onkyo HT-S6300 | Owner Manual - Page 42
... 41). • The speakers cannot be calibrated while the AV receiver is muted. *1 For the center speaker and subwoofer, the level settings made by using the Audio....
■ PLIIx Music (2ch Input) These settings apply to only 2-channel stereo sources. If you're not ...
- Onkyo HT-S6300 | Owner Manual - Page 43
...is attenuated in order to create the center channel. Setting a value "0" in the middle is set to hear a sound. Sound...the listening angle is 20 degrees. With this setting, you can optimize the Theater-Dimensional listening mode by specifying the angle of the front left and right speakers relative ...
- Onkyo HT-S6300 | Owner Manual - Page 44
... mixed in rooms calibrated for film reference. To achieve the same reference level in a home theater system each speaker level must be adjusted so that ...75 dB sound pressure level at the listening position. A home theater system automatically calibrated by Audyssey 2EQ will play ...
- Onkyo HT-S6300 | Owner Manual - Page 45
...Dynamic Volume® Audyssey Dynamic Volume solves the problem of large variations in volume level between ...whether watching movies, flipping between television channels, or changing from stereo to surround sound content....enabled (➔ 49) and your TV or display supports HDMI Lip Sync, the displayed delay...
- Onkyo HT-S6300 | Owner Manual - Page 46
...and then press ENTER.
Auto: According to the input signals and monitor output setting, the AV receiver automatically selects the "4 : 3", "Full", "...the original picture. When the "Film Mode" setting is set to "Auto", the AV receiver automatically detects the picture source...
- Onkyo HT-S6300 | Owner Manual - Page 47
... is played (DVD, etc.). ■ 2ch Source With this setting, you can specify the default listening mode for 2-channel (2/0) stereo sources in a digital format,... select other listening modes during playback, but the mode specified here will be resumed once the AV receiver has been set to Standby.
- Onkyo HT-S6300 | Owner Manual - Page 48
... this preference, you can specify the volume setting to be used each time the AV receiver is turned on. To use the same volume ... a volume difference between your speakers and your headphones.
■ Remote ID 1, 2, or 3 When several Onkyo components are used in the same room, their remote ID ...
- Onkyo HT-S6300 | Owner Manual - Page 49
... can be output from the TV, the AV receiver will output no sound through its speakers. In this case, "TV Sp ... can be sent to the HDMI OUT of the AV receiver. Audio return channel (ARC) function enables an...(Audio Return Channel) capable TV to send the audio stream to the HDMI OUT of the AV receiver. ...
- Onkyo HT-S6300 | Owner Manual - Page 50
...(RIHD)" (➔ 49) and "Power Control" (➔ 49) settings are both set to "On". • Refer to the connected component's instruction manual for details.
Press RECEIVER followed by AUDIO. Use / to select "Audio", and then use / / / ...
- Onkyo HT-S6300 | Owner Manual - Page 51
... the volume of each speaker while listening to an input source. These temporary adjustments are cancelled when the AV receiver is set to ...to 0dB to +12dB in 1 dB steps.
Note • You cannot use this function while the AV receiver is muted. • Speakers that are set to "No" or "None" in the "...
- Onkyo HT-S6300 | Owner Manual - Page 52
... as a priority. Analog: The AV receiver always outputs analog signals.
Note • The setting is stored individually for each ... ENTER again allows you to return to the "Audio Selector" setting. Normally, the AV receiver detects the signal format automatically. However, if you experience either of ...
- Onkyo HT-S6300 | Owner Manual - Page 53
... your Zone 2 speakers to the speaker terminals on your Zone 2 amp.
Connecting Your Zone 2 Speakers Directly to the AV receiver
This setup allows 5.1-channel playback in your main room and 2-channel stereo playback in Zone 2, with a different ...
- Onkyo HT-S6300 | Owner Manual - Page 54
If you've connected your Zone 2 speakers to the AV receiver, as explained in "Connecting Your Zone 2 Speakers ... the volume for Zone 2.
Controlling Zone 2 from the AV receiver
ZONE 2 OFF - /+
In the "Speaker Setup" menu, select "Speaker Settings", and ...
- Onkyo HT-S6300 | Owner Manual - Page 55
... adjust the volume.
MUTING VOL /
■ Operating on the AV receiver Press ZONE 2 (the ZONE 2 indicator and Zone... each room.
If your Zone 2 speakers are connected to a receiver or integrated amp in Zone 2, use ...LINE OUT and FRONT HIGH OR ZONE 2 SPEAKERS L/R terminals. Digital input sources are not ...
- Onkyo HT-S6300 | Owner Manual - Page 56
Controlling iPod & Other Components
Connecting an Onkyo Dock
Onkyo Dock UP-A1 Dock (Included) (... use (Remote Interactive), you must make an analog audio connection (RCA) between the AV receiver and the RI Dock.
Models sold are different depending on the region.
- Onkyo HT-S6300 | Owner Manual - Page 57
... Onkyo web site at: http://www.onkyo.com Before using the Onkyo Dock components, update your iPod ... models ■ Putting Your iPod in the Dock 1. Turn on the AV receiver, and select the PORT selector. ... AV receiver is set to minimum. • To prevent damage to the dock connector, don't twist your iPod ...
- Onkyo HT-S6300 | Owner Manual - Page 58
...charged when the AV receiver is set to "On" or "Standby".
Note • When UP-A1 Dock that seated iPod ...control your iPod in the Dock with the following buttons. See "Remote Control Codes for Onkyo Components ...System Function System On When you turn on the AV receiver, the RI Dock and iPod turn...
- Onkyo HT-S6300 | Owner Manual - Page 59
... appropriate REMOTE MODE first. Onkyo Dock UP-A1 Dock
Buttons ON/STANDBY TOP MENU... please refer to the instruction manual of RI Dock. *1 This button does not turn the Onkyo DS-A2 or DS-A2X RI Dock on or off. Your iPod...AV receiver is turned off. In Extended mode (see *2), you cannot operate your iPod ...
- Onkyo HT-S6300 | Owner Manual - Page 60
..., see the pages indicated. BD/DVD Onkyo Blu-ray Disc player (➔ 62)... CD player (➔ 62) PORT Onkyo Universal Port Option (➔ 58)
A N 1
B O 2
C P 3
D E Q R 4 5 Space
F S 6
G T 7
H U 8
I J V W 9 0 Back ... Soniko Not Listed
1 2 3
Press RECEIVER followed by SETUP. The main menu appears onscreen...
- Onkyo HT-S6300 | Owner Manual - Page 61
... Onkyo cassette tape deck with • PORT 81993: Onkyo Dock See the previous section for how to enter ... Connected via
Onkyo components that are connected via are controlled by pointing the remote controller at the AV receiver, ...Onkyo CD recorder 82990: Onkyo Dock
Note • If you connect a cassette tape ...
- Onkyo HT-S6300 | Owner Manual - Page 62
... to controlling a TV that supports the some models). The TV must be able to receive remote control ... the remote controller to its default settings.
While holding down RECEIVER, press and hold ... via HDMI.
The supported by the AV receiver is the CEC system control function of the HDMI standard...
- Onkyo HT-S6300 | Owner Manual - Page 63
... CH MENU RETURN AUDIO CLR
✔ ✔ ✔
✔*1*2 ✔*1 ✔*2 ✔*1*2 ✔ ✔*1*2 ✔*1 1 ✔ ✔*1 2 ✔*2 ✔*1*2 ✔*1 ✔*2
Number: 1 to 9, 0 ✔
The function is not supported. The supported by the AV receiver is the CEC system control function of the HDMI ...
- Onkyo HT-S6300 | Owner Manual - Page 64
... yourself, try resetting the AV receiver before contacting your Onkyo dealer. To reset the AV receiver ... off when you set the volume to maximum, disconnect the power cord, and contact your Onkyo ... shorting. 16 Check the volume. The AV receiver is designed for - home theater enjoyment. It has a wide ...
- Onkyo HT-S6300 | Owner Manual - Page 65
...if a maximum volume has been set. 48 If the volume level of each individual speaker has 28, 41 ... audio performance, so don't do it. -
■ The surround speakers produce no sound
When the T-D (Theater-Dimensional), Stereo or Mono listening mode is selected, the surround speakers produce no sound. ...
- Onkyo HT-S6300 | Owner Manual - Page 66
■ Can’t control other components
21 If it’s an Onkyo component, make sure that the cable and analog audio cable ...s component, point 61 the remote controller at that component. To control an Onkyo component that’s connected via 61 , point the remote controller at the AV receiver. Be sure ...
- Onkyo HT-S6300 | Owner Manual - Page 67
To control an Onkyo component that's not connected 61 via , point the remote controller at the component. Be...-
■ The speaker distance cannot be set as required
In some cases, corrected values suitable for home theater use may be set automatically. -
The iPod cannot be operated while it's ...
- Onkyo HT-S6300 | Owner Manual - Page 68
... want to set when you've finished.
Important Note Regarding Video Playback The AV receiver can ... seconds, and then plug it back in again. Onkyo is not responsible for damages (such as CD ... disconnecting the power cord from the wall outlet, set the AV receiver to Standby.
If the video source is ...
- Onkyo HT-S6300 | Owner Manual - Page 69
Rated Output Power All channels:
Power Supply...LINE, IHF-A) Speaker Impedance 6 Ω - 16 Ω
Input Output Video Resolution Audio Format Supported IN ...DTS Master Audio, DVD-Audio, DSD 3D, Audio Return Channel, Deep Color, x.v.Color, LipSync...
- Onkyo HT-S6300 | Owner Manual - Page 70
7.1ch Home Theater Speaker Package (HTP-680)
■ Powered Subwoofer (SKW-770)
Type Bass-reflex Input ... Drivers unit Terminal Keyhole slot Grille
■ Front Speaker (SKF-680)
Type 2 Way closed box ... type color coded 2 Fixed
■ Surround/Surround Back Speaker (SKR-680/SKB-680)
Type Full-Range ...
- Onkyo HT-S6300 | Owner Manual - Page 71
7.1ch Home Theater Speaker Package (HTP-780)
■ Powered Subwoofer (SKW-780)
Type Bass-reflex Input sensitivity/Impedance 140 mV/20 ... type color coded 1 Fixed
Weight Drivers unit Terminal Keyhole slot Grille
Dock for iPod UP-A1
Dimensions (W × H × D) 3-1/4" × 1-5/16" × 2-15/16" 83 mm ...
- Onkyo HT-S6300 | Owner Manual - Page 72
... of the above audio formats.
About Copyright Protection
The AV receiver supports HDCP (High-bandwidth Digital Content Protection)*2, a copy-protection system for digital ... signals. Other devices connected to the AV receiver via HDMI must also support HDCP.
*1 *2 *3
DVI (Digital ...
- Onkyo HT-S6300 | Owner Manual - Page 73
... stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with ... (See Onkyo web site for latest information on compatible models.) Players/Recorders • Onkyo and Integra -compatible players • ...
- Onkyo HT-S6300 | Owner Manual - Page 74
...from the TV speakers.
Note • Perform the above operations when you initially use the AV receiver, when the settings of each... possible depending on the player models.) • Even if you set to output audio on the TV speakers, audio will be output from the speakers connected to the AV receiver when you...
- Onkyo HT-S6300 | Owner Manual - Page 75
Video Resolution Chart
The following tables show how video signals at different resolutions are output by the AV receiver. ✔: Output
Output Input HDMI 1080p 1080i 720p 480p 480i Component 1080p 1080i 720p 480p 480i Composite 480i HDMI 1080p 1080i 720p 480p 480i Component 1080p 1080i 720p 480p ...
- Onkyo HT-S6300 | Owner Manual - Page 76
...-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194...: +49-8142-4401-555 http://www.eu.onkyo.com/ ONKYO EUROPE ELECTRONICS GmbH (UK BRANCH) ...-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/
(C) Copyright 2010 ONKYO CORPORATION...