Panasonic KXFPG378 KXFPG378 User Guide - Page 15
Installation (Base Unit), 1.6 Ink film, 6.1 Installing the ink film
View all Panasonic KXFPG378 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation (Base Unit) 1.6 Ink film The included film roll is a starter ink film. 1.6.1 Installing the ink film Important: L Remove all the blue shipping tape from the unit before installation. 1 Open the front cover by pulling up the center part. 1. Introduction and Installation 3 Open the back cover. 2 Release the back cover by pushing the green button (1). L You can also release the back cover by pushing in the green lever (2). 1 4 Insert the front ink film roll by inserting its blue gear into the left slot of the unit (1). Insert the rear ink film roll by inserting its white gear into the left slot of the unit (2). L The ink film is safe to touch and will not rub off on your hands like carbon paper. L Make sure the blue gear (1) and white gear (2) are installed as shown. 2 1 2 For Fax Advantage assistance, call 1-800-435-7329. 13