Panasonic KXFPG378 KXFPG378 User Guide - Page 80
Option, Handset Registration, 9.1 Re-registering the handset
View all Panasonic KXFPG378 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
9. Option 9HaOnpdtsioent Registration 9.1 Re-registering the handset If "No link to base. Move closer to base, try again." is displayed even when the handset is near the base unit, you may need to re-register the handset to the base unit. Make sure the base unit and the handset are near each other and not being used. Registration must be completed within 1 minute. L Keep the front cover page open for button locations. 1 Base unit: Press and hold {LOCATOR/INTERCOM} until a beep sounds. L "HS REGISTRATION" is displayed. 2 Handset: Press and hold {FLASH/CALL WAIT} until "Handset Registering" is displayed. L When registration is complete, a beep sounds from the handset. L Wait for 20 seconds after registration is completed while the handset establishes communication with the base unit. Note: L To stop registration, press {OFF} on the handset and press {LOCATOR/INTERCOM} on the base unit. L If the handset beeps 3 times and "Error!!" is displayed, an error occurred. Try again. 78